This organic/inorganic hybrid silica based column with butyl functional group is a wide pore colume suitable for separation of proteins and oligonucleotides as well as separation of intact antibodies under high temperature. Its excellent durability makes analysis up to 90°C at pH 1-7, and 50°C at pH 7-10 possible. It is also compatible with LC-MS.
This organic/inorganic hybrid silica based column with butyl functional group is a wide pore colume suitable for separation of proteins and oligonucleotides as well as separation of intact antibodies under high temperature. Its excellent durability makes analysis up to 90°C at pH 1-7, and 50°C at pH 7-10 possible. It is also compatible with LC-MS.
In the analysis of intact antibodies from 40°C up to 90°C, good peak shape was obtained at 70°C and onwards. Its excellent durability enables analysis of antibodies even at high temperature up to 90°C.
Column | YMC-Triart Bio C4 (3 µm, 300 Å) 150 X 3.0 mmI.D. |
Eluent | A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 30-60%B (0-15 min), 90%B (15-30 min) |
Flow rate | 0.4 mL/min |
Detection | UV at 220 nm |
Sample | Humanized monoclonal IgG1 |
Injection | 4 µL |
Good peak shape was obtained using YMC-Triart Bio C4 compared to competitor C4. As YMC-Triart Bio C4 is compatible with mobile phase containing formic acid, it is suitable for LC-MS analysis.
Column size | 150 X 3.0 mmI.D or 4.6 mml.D. |
Eluent | A) water/formic acid (100/0.1) B) acetonitrile/formid acid (100/0.1) 10-95%B (0-15 min) |
Flow rate | 0.4 mL/min for 3.0 mml.D. 1.0 mL/min for 4.6 mml.D. |
Temperature | 40℃ |
Detection | UV at 220 nm |
In the analysis of intact antibodies from 40°C up to 90°C, good peak shape was obtained at 70°C and onwards. Its excellent durability enables analysis of antibodies even at high temperature up to 90°C.
Column | YMC-Triart Bio C4 (3 µm, 300 Å) 150 X 3.0 mmI.D. |
Eluent | A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 30-60%B (0-15 min), 90%B (15-30 min) |
Flow rate | 0.4 mL/min |
Detection | UV at 220 nm |
Sample | Humanized monoclonal IgG1 |
Injection | 4 µL |
Good peak shape was obtained using YMC-Triart Bio C4 compared to competitor C4. As YMC-Triart Bio C4 is compatible with mobile phase containing formic acid, it is suitable for LC-MS analysis.
Column size | 150 X 3.0 mmI.D or 4.6 mml.D. |
Eluent | A) water/formic acid (100/0.1) B) acetonitrile/formid acid (100/0.1) 10-95%B (0-15 min) |
Flow rate | 0.4 mL/min for 3.0 mml.D. 1.0 mL/min for 4.6 mml.D. |
Temperature | 40℃ |
Detection | UV at 220 nm |
In the analysis of intact antibodies from 40°C up to 90°C, good peak shape was obtained at 70°C and onwards. Its excellent durability enables analysis of antibodies even at high temperature up to 90°C.
Column | YMC-Triart Bio C4 (3 µm, 300 Å) 150 X 3.0 mmI.D. |
Eluent | A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 30-60%B (0-15 min), 90%B (15-30 min) |
Flow rate | 0.4 mL/min |
Detection | UV at 220 nm |
Sample | Humanized monoclonal IgG1 |
Injection | 4 µL |
Good peak shape was obtained using YMC-Triart Bio C4 compared to competitor C4. As YMC-Triart Bio C4 is compatible with mobile phase containing formic acid, it is suitable for LC-MS analysis.
Column size | 150 X 3.0 mmI.D or 4.6 mml.D. |
Eluent | A) water/formic acid (100/0.1) B) acetonitrile/formid acid (100/0.1) 10-95%B (0-15 min) |
Flow rate | 0.4 mL/min for 3.0 mml.D. 1.0 mL/min for 4.6 mml.D. |
Temperature | 40℃ |
Detection | UV at 220 nm |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 20 | TB30SP9-02Q1PT |
2.1 X 30 | TB30SP9-03Q1PT | ||
2.1 X 50 | TB30SP9-05Q1PT | ||
2.1 X 75 | TB30SP9-L5Q1PT | ||
2.1 X 100 | TB30SP9-10Q1PT | ||
2.1 X 150 | TB30SP9-15Q1PT | ||
3.0 X 50 | TB30SP9-0503PT | ||
3.0 X 75 | TB30SP9-L503PT | ||
3.0 X 100 | TB30SP9-1003PT | ||
3.0 X 150 | TB30SP9-1503PT | ||
3 | 300 | 2.1 X 20 | TB30S03-02Q1PTH |
2.1 X 33 | TB30S03-H3Q1PTH | ||
2.1 X 50 | TB30S03-05Q1PTH | ||
2.1 X 75 | TB30S03-L5Q1PTH | ||
2.1 X 100 | TB30S03-10Q1PTH | ||
2.1 X 150 | TB30S03-15Q1PTH | ||
3.0 X 50 | TB30S03-0503PTH | ||
3.0 X 75 | TB30S03-L503PTH | ||
3.0 X 100 | TB30S03-1003PTH | ||
3.0 X 150 | TB30S03-1503PTH | ||
4.6 X 33 | TB30S03-H346PTH | ||
4.6 X 50 | TB30S03-0546PTH | ||
4.6 X 75 | TB30S03-L546PTH | ||
4.6 X 100 | TB30S03-1046PTH | ||
4.6 X 150 | TB30S03-1546PTH | ||
4.6 X 250 | TB30S03-2546PTH | ||
5 | 300 | 2.1 X 20 | TB30S05-02Q1PTH |
2.1 X 33 | TB30S05-H3Q1PTH | ||
2.1 X 50 | TB30S05-05Q1PTH | ||
2.1 X 75 | TB30S05-L5Q1PTH | ||
2.1 X 100 | TB30S05-10Q1PTH | ||
2.1 X 150 | TB30S05-15Q1PTH | ||
3.0 X 50 | TB30S05-0503PTH | ||
3.0 X 75 | TB30S05-L503PTH | ||
3.0 X 100 | TB30S05-1003PTH | ||
3.0 X 150 | TB30S05-1503PTH | ||
4.0 X 150 | TB30S05-1504PTH | ||
4.0 X 250 | TB30S05-2504PTH | ||
4.6 X 33 | TB30S05-H346PTH | ||
4.6 X 50 | TB30S05-0546PTH | ||
4.6 X 75 | TB30S05-L546PTH | ||
4.6 X 100 | TB30S05-1046PTH | ||
4.6 X 150 | TB30S05-1546PTH | ||
4.6 X 250 | TB30S05-2546PTH |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 10 X 150 | TB30S05-1510WT |
10 X 250 | TB30S05-2510WT |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 20 X 50 | TB30S05-0520WX |
20 X 100 | TB30S05-1020WX | ||
20 X 150 | TB30S05-1520WX | ||
20 X 250 | TB30S05-2520WX | ||
30 X 50 | TB30S05-0530WX | ||
30 X 75 | TB30S05-L530WX | ||
30 X 100 | TB30S05-1030WX | ||
30 X 150 | TB30S05-1530WX | ||
30 X 250 | TB30S05-2530WX |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 5 | TB30SP9-E5Q1CC |
3.0 X 5 | TB30SP9-E503CC |
* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
/pack | Product Number |
---|---|---|---|---|
3 | 300 | 2.1 X 10 | 5 | TB30S03-01Q1GC |
1 | TB30S03-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S03-02Q1GC | ||
1 | TB30S03-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S03-0103GC | ||
1 | TB30S03-0103GC-1 | |||
3.0 X 20 | 5 | TB30S03-0203GC | ||
1 | TB30S03-0203GC-1 | |||
4.0 X 10 | 5 | TB30S03-0104GC | ||
1 | TB30S03-0104GC-1 | |||
4.0 X 20 | 5 | TB30S03-0204GC | ||
1 | TB30S03-0204GC-1 | |||
5 | 300 | 2.1 X 10 | 5 | TB30S05-01Q1GC |
1 | TB30S05-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S05-02Q1GC | ||
1 | TB30S05-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S05-0103GC | ||
1 | TB30S05-0103GC-1 | |||
3.0 X 20 | 5 | TB30S05-0203GC | ||
1 | TB30S05-0203GC-1 | |||
4.0 X 10 | 5 | TB30S05-0104GC | ||
1 | TB30S05-0104GC-1 | |||
4.0 X 20 | 5 | TB30S05-0204GC | ||
1 | TB30S05-0204GC-1 | |||
10 X 10 | 2 | TB30S05-0110CC | ||
20 X 10 | 2 | TB30S05-0120CCN | ||
30 X 10 | 2 | TB30S05-0130CCN |
* When using it for the first time, please purchase the cartridge holder corresponding to size of column.
Product Number | ||
---|---|---|
EXP®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included) |
XPCHUHP | |
Cartridge holder | length: 10 mm | XPGCHP1 |
length: 20 mm | XPGCHP2 | |
Semi-prep Cartridge Holder | Inner diameter: 10 mm | XPCHSPW1 |
Inner diameter: 20 mm | XPGHFSP20ID | |
Inner diameter: 30 mm | XPGHFSP30ID |
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 20 | TB30SP9-02Q1PT |
2.1 X 30 | TB30SP9-03Q1PT | ||
2.1 X 50 | TB30SP9-05Q1PT | ||
2.1 X 75 | TB30SP9-L5Q1PT | ||
2.1 X 100 | TB30SP9-10Q1PT | ||
2.1 X 150 | TB30SP9-15Q1PT | ||
3.0 X 50 | TB30SP9-0503PT | ||
3.0 X 75 | TB30SP9-L503PT | ||
3.0 X 100 | TB30SP9-1003PT | ||
3.0 X 150 | TB30SP9-1503PT | ||
3 | 300 | 2.1 X 20 | TB30S03-02Q1PTH |
2.1 X 33 | TB30S03-H3Q1PTH | ||
2.1 X 50 | TB30S03-05Q1PTH | ||
2.1 X 75 | TB30S03-L5Q1PTH | ||
2.1 X 100 | TB30S03-10Q1PTH | ||
2.1 X 150 | TB30S03-15Q1PTH | ||
3.0 X 50 | TB30S03-0503PTH | ||
3.0 X 75 | TB30S03-L503PTH | ||
3.0 X 100 | TB30S03-1003PTH | ||
3.0 X 150 | TB30S03-1503PTH | ||
4.6 X 33 | TB30S03-H346PTH | ||
4.6 X 50 | TB30S03-0546PTH | ||
4.6 X 75 | TB30S03-L546PTH | ||
4.6 X 100 | TB30S03-1046PTH | ||
4.6 X 150 | TB30S03-1546PTH | ||
4.6 X 250 | TB30S03-2546PTH | ||
5 | 300 | 2.1 X 20 | TB30S05-02Q1PTH |
2.1 X 33 | TB30S05-H3Q1PTH | ||
2.1 X 50 | TB30S05-05Q1PTH | ||
2.1 X 75 | TB30S05-L5Q1PTH | ||
2.1 X 100 | TB30S05-10Q1PTH | ||
2.1 X 150 | TB30S05-15Q1PTH | ||
3.0 X 50 | TB30S05-0503PTH | ||
3.0 X 75 | TB30S05-L503PTH | ||
3.0 X 100 | TB30S05-1003PTH | ||
3.0 X 150 | TB30S05-1503PTH | ||
4.0 X 150 | TB30S05-1504PTH | ||
4.0 X 250 | TB30S05-2504PTH | ||
4.6 X 33 | TB30S05-H346PTH | ||
4.6 X 50 | TB30S05-0546PTH | ||
4.6 X 75 | TB30S05-L546PTH | ||
4.6 X 100 | TB30S05-1046PTH | ||
4.6 X 150 | TB30S05-1546PTH | ||
4.6 X 250 | TB30S05-2546PTH |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 10 X 150 | TB30S05-1510WT |
10 X 250 | TB30S05-2510WT |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 20 X 50 | TB30S05-0520WX |
20 X 100 | TB30S05-1020WX | ||
20 X 150 | TB30S05-1520WX | ||
20 X 250 | TB30S05-2520WX | ||
30 X 50 | TB30S05-0530WX | ||
30 X 75 | TB30S05-L530WX | ||
30 X 100 | TB30S05-1030WX | ||
30 X 150 | TB30S05-1530WX | ||
30 X 250 | TB30S05-2530WX |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 5 | TB30SP9-E5Q1CC |
3.0 X 5 | TB30SP9-E503CC |
* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
/pack | Product Number |
---|---|---|---|---|
3 | 300 | 2.1 X 10 | 5 | TB30S03-01Q1GC |
1 | TB30S03-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S03-02Q1GC | ||
1 | TB30S03-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S03-0103GC | ||
1 | TB30S03-0103GC-1 | |||
3.0 X 20 | 5 | TB30S03-0203GC | ||
1 | TB30S03-0203GC-1 | |||
4.0 X 10 | 5 | TB30S03-0104GC | ||
1 | TB30S03-0104GC-1 | |||
4.0 X 20 | 5 | TB30S03-0204GC | ||
1 | TB30S03-0204GC-1 | |||
5 | 300 | 2.1 X 10 | 5 | TB30S05-01Q1GC |
1 | TB30S05-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S05-02Q1GC | ||
1 | TB30S05-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S05-0103GC | ||
1 | TB30S05-0103GC-1 | |||
3.0 X 20 | 5 | TB30S05-0203GC | ||
1 | TB30S05-0203GC-1 | |||
4.0 X 10 | 5 | TB30S05-0104GC | ||
1 | TB30S05-0104GC-1 | |||
4.0 X 20 | 5 | TB30S05-0204GC | ||
1 | TB30S05-0204GC-1 | |||
10 X 10 | 2 | TB30S05-0110CC | ||
20 X 10 | 2 | TB30S05-0120CCN | ||
30 X 10 | 2 | TB30S05-0130CCN |
* When using it for the first time, please purchase the cartridge holder corresponding to size of column.
Product Number | ||
---|---|---|
EXP®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included) |
XPCHUHP | |
Cartridge holder | length: 10 mm | XPGCHP1 |
length: 20 mm | XPGCHP2 | |
Semi-prep Cartridge Holder | Inner diameter: 10 mm | XPCHSPW1 |
Inner diameter: 20 mm | XPGHFSP20ID | |
Inner diameter: 30 mm | XPGHFSP30ID |
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 20 | TB30SP9-02Q1PT |
2.1 X 30 | TB30SP9-03Q1PT | ||
2.1 X 50 | TB30SP9-05Q1PT | ||
2.1 X 75 | TB30SP9-L5Q1PT | ||
2.1 X 100 | TB30SP9-10Q1PT | ||
2.1 X 150 | TB30SP9-15Q1PT | ||
3.0 X 50 | TB30SP9-0503PT | ||
3.0 X 75 | TB30SP9-L503PT | ||
3.0 X 100 | TB30SP9-1003PT | ||
3.0 X 150 | TB30SP9-1503PT | ||
3 | 300 | 2.1 X 20 | TB30S03-02Q1PTH |
2.1 X 33 | TB30S03-H3Q1PTH | ||
2.1 X 50 | TB30S03-05Q1PTH | ||
2.1 X 75 | TB30S03-L5Q1PTH | ||
2.1 X 100 | TB30S03-10Q1PTH | ||
2.1 X 150 | TB30S03-15Q1PTH | ||
3.0 X 50 | TB30S03-0503PTH | ||
3.0 X 75 | TB30S03-L503PTH | ||
3.0 X 100 | TB30S03-1003PTH | ||
3.0 X 150 | TB30S03-1503PTH | ||
4.6 X 33 | TB30S03-H346PTH | ||
4.6 X 50 | TB30S03-0546PTH | ||
4.6 X 75 | TB30S03-L546PTH | ||
4.6 X 100 | TB30S03-1046PTH | ||
4.6 X 150 | TB30S03-1546PTH | ||
4.6 X 250 | TB30S03-2546PTH | ||
5 | 300 | 2.1 X 20 | TB30S05-02Q1PTH |
2.1 X 33 | TB30S05-H3Q1PTH | ||
2.1 X 50 | TB30S05-05Q1PTH | ||
2.1 X 75 | TB30S05-L5Q1PTH | ||
2.1 X 100 | TB30S05-10Q1PTH | ||
2.1 X 150 | TB30S05-15Q1PTH | ||
3.0 X 50 | TB30S05-0503PTH | ||
3.0 X 75 | TB30S05-L503PTH | ||
3.0 X 100 | TB30S05-1003PTH | ||
3.0 X 150 | TB30S05-1503PTH | ||
4.0 X 150 | TB30S05-1504PTH | ||
4.0 X 250 | TB30S05-2504PTH | ||
4.6 X 33 | TB30S05-H346PTH | ||
4.6 X 50 | TB30S05-0546PTH | ||
4.6 X 75 | TB30S05-L546PTH | ||
4.6 X 100 | TB30S05-1046PTH | ||
4.6 X 150 | TB30S05-1546PTH | ||
4.6 X 250 | TB30S05-2546PTH |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 10 X 150 | TB30S05-1510WT |
10 X 250 | TB30S05-2510WT |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 20 X 50 | TB30S05-0520WX |
20 X 100 | TB30S05-1020WX | ||
20 X 150 | TB30S05-1520WX | ||
20 X 250 | TB30S05-2520WX | ||
30 X 50 | TB30S05-0530WX | ||
30 X 75 | TB30S05-L530WX | ||
30 X 100 | TB30S05-1030WX | ||
30 X 150 | TB30S05-1530WX | ||
30 X 250 | TB30S05-2530WX |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 5 | TB30SP9-E5Q1CC |
3.0 X 5 | TB30SP9-E503CC |
* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
/pack | Product Number |
---|---|---|---|---|
3 | 300 | 2.1 X 10 | 5 | TB30S03-01Q1GC |
1 | TB30S03-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S03-02Q1GC | ||
1 | TB30S03-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S03-0103GC | ||
1 | TB30S03-0103GC-1 | |||
3.0 X 20 | 5 | TB30S03-0203GC | ||
1 | TB30S03-0203GC-1 | |||
4.0 X 10 | 5 | TB30S03-0104GC | ||
1 | TB30S03-0104GC-1 | |||
4.0 X 20 | 5 | TB30S03-0204GC | ||
1 | TB30S03-0204GC-1 | |||
5 | 300 | 2.1 X 10 | 5 | TB30S05-01Q1GC |
1 | TB30S05-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S05-02Q1GC | ||
1 | TB30S05-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S05-0103GC | ||
1 | TB30S05-0103GC-1 | |||
3.0 X 20 | 5 | TB30S05-0203GC | ||
1 | TB30S05-0203GC-1 | |||
4.0 X 10 | 5 | TB30S05-0104GC | ||
1 | TB30S05-0104GC-1 | |||
4.0 X 20 | 5 | TB30S05-0204GC | ||
1 | TB30S05-0204GC-1 | |||
10 X 10 | 2 | TB30S05-0110CC | ||
20 X 10 | 2 | TB30S05-0120CCN | ||
30 X 10 | 2 | TB30S05-0130CCN |
* When using it for the first time, please purchase the cartridge holder corresponding to size of column.
Product Number | ||
---|---|---|
EXP®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included) |
XPCHUHP | |
Cartridge holder | length: 10 mm | XPGCHP1 |
length: 20 mm | XPGCHP2 | |
Semi-prep Cartridge Holder | Inner diameter: 10 mm | XPCHSPW1 |
Inner diameter: 20 mm | XPGHFSP20ID | |
Inner diameter: 30 mm | XPGHFSP30ID |
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 20 | TB30SP9-02Q1PT |
2.1 X 30 | TB30SP9-03Q1PT | ||
2.1 X 50 | TB30SP9-05Q1PT | ||
2.1 X 75 | TB30SP9-L5Q1PT | ||
2.1 X 100 | TB30SP9-10Q1PT | ||
2.1 X 150 | TB30SP9-15Q1PT | ||
3.0 X 50 | TB30SP9-0503PT | ||
3.0 X 75 | TB30SP9-L503PT | ||
3.0 X 100 | TB30SP9-1003PT | ||
3.0 X 150 | TB30SP9-1503PT | ||
3 | 300 | 2.1 X 20 | TB30S03-02Q1PTH |
2.1 X 33 | TB30S03-H3Q1PTH | ||
2.1 X 50 | TB30S03-05Q1PTH | ||
2.1 X 75 | TB30S03-L5Q1PTH | ||
2.1 X 100 | TB30S03-10Q1PTH | ||
2.1 X 150 | TB30S03-15Q1PTH | ||
3.0 X 50 | TB30S03-0503PTH | ||
3.0 X 75 | TB30S03-L503PTH | ||
3.0 X 100 | TB30S03-1003PTH | ||
3.0 X 150 | TB30S03-1503PTH | ||
4.6 X 33 | TB30S03-H346PTH | ||
4.6 X 50 | TB30S03-0546PTH | ||
4.6 X 75 | TB30S03-L546PTH | ||
4.6 X 100 | TB30S03-1046PTH | ||
4.6 X 150 | TB30S03-1546PTH | ||
4.6 X 250 | TB30S03-2546PTH | ||
5 | 300 | 2.1 X 20 | TB30S05-02Q1PTH |
2.1 X 33 | TB30S05-H3Q1PTH | ||
2.1 X 50 | TB30S05-05Q1PTH | ||
2.1 X 75 | TB30S05-L5Q1PTH | ||
2.1 X 100 | TB30S05-10Q1PTH | ||
2.1 X 150 | TB30S05-15Q1PTH | ||
3.0 X 50 | TB30S05-0503PTH | ||
3.0 X 75 | TB30S05-L503PTH | ||
3.0 X 100 | TB30S05-1003PTH | ||
3.0 X 150 | TB30S05-1503PTH | ||
4.0 X 150 | TB30S05-1504PTH | ||
4.0 X 250 | TB30S05-2504PTH | ||
4.6 X 33 | TB30S05-H346PTH | ||
4.6 X 50 | TB30S05-0546PTH | ||
4.6 X 75 | TB30S05-L546PTH | ||
4.6 X 100 | TB30S05-1046PTH | ||
4.6 X 150 | TB30S05-1546PTH | ||
4.6 X 250 | TB30S05-2546PTH |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 10 X 150 | TB30S05-1510WT |
10 X 250 | TB30S05-2510WT |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 20 X 50 | TB30S05-0520WX |
20 X 100 | TB30S05-1020WX | ||
20 X 150 | TB30S05-1520WX | ||
20 X 250 | TB30S05-2520WX | ||
30 X 50 | TB30S05-0530WX | ||
30 X 75 | TB30S05-L530WX | ||
30 X 100 | TB30S05-1030WX | ||
30 X 150 | TB30S05-1530WX | ||
30 X 250 | TB30S05-2530WX |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 5 | TB30SP9-E5Q1CC |
3.0 X 5 | TB30SP9-E503CC |
* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
/pack | Product Number |
---|---|---|---|---|
3 | 300 | 2.1 X 10 | 5 | TB30S03-01Q1GC |
1 | TB30S03-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S03-02Q1GC | ||
1 | TB30S03-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S03-0103GC | ||
1 | TB30S03-0103GC-1 | |||
3.0 X 20 | 5 | TB30S03-0203GC | ||
1 | TB30S03-0203GC-1 | |||
4.0 X 10 | 5 | TB30S03-0104GC | ||
1 | TB30S03-0104GC-1 | |||
4.0 X 20 | 5 | TB30S03-0204GC | ||
1 | TB30S03-0204GC-1 | |||
5 | 300 | 2.1 X 10 | 5 | TB30S05-01Q1GC |
1 | TB30S05-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S05-02Q1GC | ||
1 | TB30S05-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S05-0103GC | ||
1 | TB30S05-0103GC-1 | |||
3.0 X 20 | 5 | TB30S05-0203GC | ||
1 | TB30S05-0203GC-1 | |||
4.0 X 10 | 5 | TB30S05-0104GC | ||
1 | TB30S05-0104GC-1 | |||
4.0 X 20 | 5 | TB30S05-0204GC | ||
1 | TB30S05-0204GC-1 | |||
10 X 10 | 2 | TB30S05-0110CC | ||
20 X 10 | 2 | TB30S05-0120CCN | ||
30 X 10 | 2 | TB30S05-0130CCN |
* When using it for the first time, please purchase the cartridge holder corresponding to size of column.
Product Number | ||
---|---|---|
EXP®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included) |
XPCHUHP | |
Cartridge holder | length: 10 mm | XPGCHP1 |
length: 20 mm | XPGCHP2 | |
Semi-prep Cartridge Holder | Inner diameter: 10 mm | XPCHSPW1 |
Inner diameter: 20 mm | XPGHFSP20ID | |
Inner diameter: 30 mm | XPGHFSP30ID |
* EXP is a registered trademark of Optimize Technologies, Inc.
In the analysis of intact antibodies from 40°C up to 90°C, good peak shape was obtained at 70°C and onwards. Its excellent durability enables analysis of antibodies even at high temperature up to 90°C.
Column | YMC-Triart Bio C4 (3 µm, 300 Å) 150 X 3.0 mmI.D. |
Eluent | A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 30-60%B (0-15 min), 90%B (15-30 min) |
Flow rate | 0.4 mL/min |
Detection | UV at 220 nm |
Sample | Humanized monoclonal IgG1 |
Injection | 4 µL |
Good peak shape was obtained using YMC-Triart Bio C4 compared to competitor C4. As YMC-Triart Bio C4 is compatible with mobile phase containing formic acid, it is suitable for LC-MS analysis.
Column size | 150 X 3.0 mmI.D or 4.6 mml.D. |
Eluent | A) water/formic acid (100/0.1) B) acetonitrile/formid acid (100/0.1) 10-95%B (0-15 min) |
Flow rate | 0.4 mL/min for 3.0 mml.D. 1.0 mL/min for 4.6 mml.D. |
Temperature | 40℃ |
Detection | UV at 220 nm |
In the analysis of intact antibodies from 40°C up to 90°C, good peak shape was obtained at 70°C and onwards. Its excellent durability enables analysis of antibodies even at high temperature up to 90°C.
Column | YMC-Triart Bio C4 (3 µm, 300 Å) 150 X 3.0 mmI.D. |
Eluent | A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 30-60%B (0-15 min), 90%B (15-30 min) |
Flow rate | 0.4 mL/min |
Detection | UV at 220 nm |
Sample | Humanized monoclonal IgG1 |
Injection | 4 µL |
Good peak shape was obtained using YMC-Triart Bio C4 compared to competitor C4. As YMC-Triart Bio C4 is compatible with mobile phase containing formic acid, it is suitable for LC-MS analysis.
Column size | 150 X 3.0 mmI.D or 4.6 mml.D. |
Eluent | A) water/formic acid (100/0.1) B) acetonitrile/formid acid (100/0.1) 10-95%B (0-15 min) |
Flow rate | 0.4 mL/min for 3.0 mml.D. 1.0 mL/min for 4.6 mml.D. |
Temperature | 40℃ |
Detection | UV at 220 nm |
In the analysis of intact antibodies from 40°C up to 90°C, good peak shape was obtained at 70°C and onwards. Its excellent durability enables analysis of antibodies even at high temperature up to 90°C.
Column | YMC-Triart Bio C4 (3 µm, 300 Å) 150 X 3.0 mmI.D. |
Eluent | A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 30-60%B (0-15 min), 90%B (15-30 min) |
Flow rate | 0.4 mL/min |
Detection | UV at 220 nm |
Sample | Humanized monoclonal IgG1 |
Injection | 4 µL |
Good peak shape was obtained using YMC-Triart Bio C4 compared to competitor C4. As YMC-Triart Bio C4 is compatible with mobile phase containing formic acid, it is suitable for LC-MS analysis.
Column size | 150 X 3.0 mmI.D or 4.6 mml.D. |
Eluent | A) water/formic acid (100/0.1) B) acetonitrile/formid acid (100/0.1) 10-95%B (0-15 min) |
Flow rate | 0.4 mL/min for 3.0 mml.D. 1.0 mL/min for 4.6 mml.D. |
Temperature | 40℃ |
Detection | UV at 220 nm |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 20 | TB30SP9-02Q1PT |
2.1 X 30 | TB30SP9-03Q1PT | ||
2.1 X 50 | TB30SP9-05Q1PT | ||
2.1 X 75 | TB30SP9-L5Q1PT | ||
2.1 X 100 | TB30SP9-10Q1PT | ||
2.1 X 150 | TB30SP9-15Q1PT | ||
3.0 X 50 | TB30SP9-0503PT | ||
3.0 X 75 | TB30SP9-L503PT | ||
3.0 X 100 | TB30SP9-1003PT | ||
3.0 X 150 | TB30SP9-1503PT | ||
3 | 300 | 2.1 X 20 | TB30S03-02Q1PTH |
2.1 X 33 | TB30S03-H3Q1PTH | ||
2.1 X 50 | TB30S03-05Q1PTH | ||
2.1 X 75 | TB30S03-L5Q1PTH | ||
2.1 X 100 | TB30S03-10Q1PTH | ||
2.1 X 150 | TB30S03-15Q1PTH | ||
3.0 X 50 | TB30S03-0503PTH | ||
3.0 X 75 | TB30S03-L503PTH | ||
3.0 X 100 | TB30S03-1003PTH | ||
3.0 X 150 | TB30S03-1503PTH | ||
4.6 X 33 | TB30S03-H346PTH | ||
4.6 X 50 | TB30S03-0546PTH | ||
4.6 X 75 | TB30S03-L546PTH | ||
4.6 X 100 | TB30S03-1046PTH | ||
4.6 X 150 | TB30S03-1546PTH | ||
4.6 X 250 | TB30S03-2546PTH | ||
5 | 300 | 2.1 X 20 | TB30S05-02Q1PTH |
2.1 X 33 | TB30S05-H3Q1PTH | ||
2.1 X 50 | TB30S05-05Q1PTH | ||
2.1 X 75 | TB30S05-L5Q1PTH | ||
2.1 X 100 | TB30S05-10Q1PTH | ||
2.1 X 150 | TB30S05-15Q1PTH | ||
3.0 X 50 | TB30S05-0503PTH | ||
3.0 X 75 | TB30S05-L503PTH | ||
3.0 X 100 | TB30S05-1003PTH | ||
3.0 X 150 | TB30S05-1503PTH | ||
4.0 X 150 | TB30S05-1504PTH | ||
4.0 X 250 | TB30S05-2504PTH | ||
4.6 X 33 | TB30S05-H346PTH | ||
4.6 X 50 | TB30S05-0546PTH | ||
4.6 X 75 | TB30S05-L546PTH | ||
4.6 X 100 | TB30S05-1046PTH | ||
4.6 X 150 | TB30S05-1546PTH | ||
4.6 X 250 | TB30S05-2546PTH |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 10 X 150 | TB30S05-1510WT |
10 X 250 | TB30S05-2510WT |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 20 X 50 | TB30S05-0520WX |
20 X 100 | TB30S05-1020WX | ||
20 X 150 | TB30S05-1520WX | ||
20 X 250 | TB30S05-2520WX | ||
30 X 50 | TB30S05-0530WX | ||
30 X 75 | TB30S05-L530WX | ||
30 X 100 | TB30S05-1030WX | ||
30 X 150 | TB30S05-1530WX | ||
30 X 250 | TB30S05-2530WX |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 5 | TB30SP9-E5Q1CC |
3.0 X 5 | TB30SP9-E503CC |
* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
/pack | Product Number |
---|---|---|---|---|
3 | 300 | 2.1 X 10 | 5 | TB30S03-01Q1GC |
1 | TB30S03-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S03-02Q1GC | ||
1 | TB30S03-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S03-0103GC | ||
1 | TB30S03-0103GC-1 | |||
3.0 X 20 | 5 | TB30S03-0203GC | ||
1 | TB30S03-0203GC-1 | |||
4.0 X 10 | 5 | TB30S03-0104GC | ||
1 | TB30S03-0104GC-1 | |||
4.0 X 20 | 5 | TB30S03-0204GC | ||
1 | TB30S03-0204GC-1 | |||
5 | 300 | 2.1 X 10 | 5 | TB30S05-01Q1GC |
1 | TB30S05-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S05-02Q1GC | ||
1 | TB30S05-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S05-0103GC | ||
1 | TB30S05-0103GC-1 | |||
3.0 X 20 | 5 | TB30S05-0203GC | ||
1 | TB30S05-0203GC-1 | |||
4.0 X 10 | 5 | TB30S05-0104GC | ||
1 | TB30S05-0104GC-1 | |||
4.0 X 20 | 5 | TB30S05-0204GC | ||
1 | TB30S05-0204GC-1 | |||
10 X 10 | 2 | TB30S05-0110CC | ||
20 X 10 | 2 | TB30S05-0120CCN | ||
30 X 10 | 2 | TB30S05-0130CCN |
* When using it for the first time, please purchase the cartridge holder corresponding to size of column.
Product Number | ||
---|---|---|
EXP®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included) |
XPCHUHP | |
Cartridge holder | length: 10 mm | XPGCHP1 |
length: 20 mm | XPGCHP2 | |
Semi-prep Cartridge Holder | Inner diameter: 10 mm | XPCHSPW1 |
Inner diameter: 20 mm | XPGHFSP20ID | |
Inner diameter: 30 mm | XPGHFSP30ID |
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 20 | TB30SP9-02Q1PT |
2.1 X 30 | TB30SP9-03Q1PT | ||
2.1 X 50 | TB30SP9-05Q1PT | ||
2.1 X 75 | TB30SP9-L5Q1PT | ||
2.1 X 100 | TB30SP9-10Q1PT | ||
2.1 X 150 | TB30SP9-15Q1PT | ||
3.0 X 50 | TB30SP9-0503PT | ||
3.0 X 75 | TB30SP9-L503PT | ||
3.0 X 100 | TB30SP9-1003PT | ||
3.0 X 150 | TB30SP9-1503PT | ||
3 | 300 | 2.1 X 20 | TB30S03-02Q1PTH |
2.1 X 33 | TB30S03-H3Q1PTH | ||
2.1 X 50 | TB30S03-05Q1PTH | ||
2.1 X 75 | TB30S03-L5Q1PTH | ||
2.1 X 100 | TB30S03-10Q1PTH | ||
2.1 X 150 | TB30S03-15Q1PTH | ||
3.0 X 50 | TB30S03-0503PTH | ||
3.0 X 75 | TB30S03-L503PTH | ||
3.0 X 100 | TB30S03-1003PTH | ||
3.0 X 150 | TB30S03-1503PTH | ||
4.6 X 33 | TB30S03-H346PTH | ||
4.6 X 50 | TB30S03-0546PTH | ||
4.6 X 75 | TB30S03-L546PTH | ||
4.6 X 100 | TB30S03-1046PTH | ||
4.6 X 150 | TB30S03-1546PTH | ||
4.6 X 250 | TB30S03-2546PTH | ||
5 | 300 | 2.1 X 20 | TB30S05-02Q1PTH |
2.1 X 33 | TB30S05-H3Q1PTH | ||
2.1 X 50 | TB30S05-05Q1PTH | ||
2.1 X 75 | TB30S05-L5Q1PTH | ||
2.1 X 100 | TB30S05-10Q1PTH | ||
2.1 X 150 | TB30S05-15Q1PTH | ||
3.0 X 50 | TB30S05-0503PTH | ||
3.0 X 75 | TB30S05-L503PTH | ||
3.0 X 100 | TB30S05-1003PTH | ||
3.0 X 150 | TB30S05-1503PTH | ||
4.0 X 150 | TB30S05-1504PTH | ||
4.0 X 250 | TB30S05-2504PTH | ||
4.6 X 33 | TB30S05-H346PTH | ||
4.6 X 50 | TB30S05-0546PTH | ||
4.6 X 75 | TB30S05-L546PTH | ||
4.6 X 100 | TB30S05-1046PTH | ||
4.6 X 150 | TB30S05-1546PTH | ||
4.6 X 250 | TB30S05-2546PTH |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 10 X 150 | TB30S05-1510WT |
10 X 250 | TB30S05-2510WT |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 20 X 50 | TB30S05-0520WX |
20 X 100 | TB30S05-1020WX | ||
20 X 150 | TB30S05-1520WX | ||
20 X 250 | TB30S05-2520WX | ||
30 X 50 | TB30S05-0530WX | ||
30 X 75 | TB30S05-L530WX | ||
30 X 100 | TB30S05-1030WX | ||
30 X 150 | TB30S05-1530WX | ||
30 X 250 | TB30S05-2530WX |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 5 | TB30SP9-E5Q1CC |
3.0 X 5 | TB30SP9-E503CC |
* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
/pack | Product Number |
---|---|---|---|---|
3 | 300 | 2.1 X 10 | 5 | TB30S03-01Q1GC |
1 | TB30S03-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S03-02Q1GC | ||
1 | TB30S03-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S03-0103GC | ||
1 | TB30S03-0103GC-1 | |||
3.0 X 20 | 5 | TB30S03-0203GC | ||
1 | TB30S03-0203GC-1 | |||
4.0 X 10 | 5 | TB30S03-0104GC | ||
1 | TB30S03-0104GC-1 | |||
4.0 X 20 | 5 | TB30S03-0204GC | ||
1 | TB30S03-0204GC-1 | |||
5 | 300 | 2.1 X 10 | 5 | TB30S05-01Q1GC |
1 | TB30S05-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S05-02Q1GC | ||
1 | TB30S05-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S05-0103GC | ||
1 | TB30S05-0103GC-1 | |||
3.0 X 20 | 5 | TB30S05-0203GC | ||
1 | TB30S05-0203GC-1 | |||
4.0 X 10 | 5 | TB30S05-0104GC | ||
1 | TB30S05-0104GC-1 | |||
4.0 X 20 | 5 | TB30S05-0204GC | ||
1 | TB30S05-0204GC-1 | |||
10 X 10 | 2 | TB30S05-0110CC | ||
20 X 10 | 2 | TB30S05-0120CCN | ||
30 X 10 | 2 | TB30S05-0130CCN |
* When using it for the first time, please purchase the cartridge holder corresponding to size of column.
Product Number | ||
---|---|---|
EXP®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included) |
XPCHUHP | |
Cartridge holder | length: 10 mm | XPGCHP1 |
length: 20 mm | XPGCHP2 | |
Semi-prep Cartridge Holder | Inner diameter: 10 mm | XPCHSPW1 |
Inner diameter: 20 mm | XPGHFSP20ID | |
Inner diameter: 30 mm | XPGHFSP30ID |
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 20 | TB30SP9-02Q1PT |
2.1 X 30 | TB30SP9-03Q1PT | ||
2.1 X 50 | TB30SP9-05Q1PT | ||
2.1 X 75 | TB30SP9-L5Q1PT | ||
2.1 X 100 | TB30SP9-10Q1PT | ||
2.1 X 150 | TB30SP9-15Q1PT | ||
3.0 X 50 | TB30SP9-0503PT | ||
3.0 X 75 | TB30SP9-L503PT | ||
3.0 X 100 | TB30SP9-1003PT | ||
3.0 X 150 | TB30SP9-1503PT | ||
3 | 300 | 2.1 X 20 | TB30S03-02Q1PTH |
2.1 X 33 | TB30S03-H3Q1PTH | ||
2.1 X 50 | TB30S03-05Q1PTH | ||
2.1 X 75 | TB30S03-L5Q1PTH | ||
2.1 X 100 | TB30S03-10Q1PTH | ||
2.1 X 150 | TB30S03-15Q1PTH | ||
3.0 X 50 | TB30S03-0503PTH | ||
3.0 X 75 | TB30S03-L503PTH | ||
3.0 X 100 | TB30S03-1003PTH | ||
3.0 X 150 | TB30S03-1503PTH | ||
4.6 X 33 | TB30S03-H346PTH | ||
4.6 X 50 | TB30S03-0546PTH | ||
4.6 X 75 | TB30S03-L546PTH | ||
4.6 X 100 | TB30S03-1046PTH | ||
4.6 X 150 | TB30S03-1546PTH | ||
4.6 X 250 | TB30S03-2546PTH | ||
5 | 300 | 2.1 X 20 | TB30S05-02Q1PTH |
2.1 X 33 | TB30S05-H3Q1PTH | ||
2.1 X 50 | TB30S05-05Q1PTH | ||
2.1 X 75 | TB30S05-L5Q1PTH | ||
2.1 X 100 | TB30S05-10Q1PTH | ||
2.1 X 150 | TB30S05-15Q1PTH | ||
3.0 X 50 | TB30S05-0503PTH | ||
3.0 X 75 | TB30S05-L503PTH | ||
3.0 X 100 | TB30S05-1003PTH | ||
3.0 X 150 | TB30S05-1503PTH | ||
4.0 X 150 | TB30S05-1504PTH | ||
4.0 X 250 | TB30S05-2504PTH | ||
4.6 X 33 | TB30S05-H346PTH | ||
4.6 X 50 | TB30S05-0546PTH | ||
4.6 X 75 | TB30S05-L546PTH | ||
4.6 X 100 | TB30S05-1046PTH | ||
4.6 X 150 | TB30S05-1546PTH | ||
4.6 X 250 | TB30S05-2546PTH |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 10 X 150 | TB30S05-1510WT |
10 X 250 | TB30S05-2510WT |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 20 X 50 | TB30S05-0520WX |
20 X 100 | TB30S05-1020WX | ||
20 X 150 | TB30S05-1520WX | ||
20 X 250 | TB30S05-2520WX | ||
30 X 50 | TB30S05-0530WX | ||
30 X 75 | TB30S05-L530WX | ||
30 X 100 | TB30S05-1030WX | ||
30 X 150 | TB30S05-1530WX | ||
30 X 250 | TB30S05-2530WX |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 5 | TB30SP9-E5Q1CC |
3.0 X 5 | TB30SP9-E503CC |
* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
/pack | Product Number |
---|---|---|---|---|
3 | 300 | 2.1 X 10 | 5 | TB30S03-01Q1GC |
1 | TB30S03-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S03-02Q1GC | ||
1 | TB30S03-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S03-0103GC | ||
1 | TB30S03-0103GC-1 | |||
3.0 X 20 | 5 | TB30S03-0203GC | ||
1 | TB30S03-0203GC-1 | |||
4.0 X 10 | 5 | TB30S03-0104GC | ||
1 | TB30S03-0104GC-1 | |||
4.0 X 20 | 5 | TB30S03-0204GC | ||
1 | TB30S03-0204GC-1 | |||
5 | 300 | 2.1 X 10 | 5 | TB30S05-01Q1GC |
1 | TB30S05-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S05-02Q1GC | ||
1 | TB30S05-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S05-0103GC | ||
1 | TB30S05-0103GC-1 | |||
3.0 X 20 | 5 | TB30S05-0203GC | ||
1 | TB30S05-0203GC-1 | |||
4.0 X 10 | 5 | TB30S05-0104GC | ||
1 | TB30S05-0104GC-1 | |||
4.0 X 20 | 5 | TB30S05-0204GC | ||
1 | TB30S05-0204GC-1 | |||
10 X 10 | 2 | TB30S05-0110CC | ||
20 X 10 | 2 | TB30S05-0120CCN | ||
30 X 10 | 2 | TB30S05-0130CCN |
* When using it for the first time, please purchase the cartridge holder corresponding to size of column.
Product Number | ||
---|---|---|
EXP®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included) |
XPCHUHP | |
Cartridge holder | length: 10 mm | XPGCHP1 |
length: 20 mm | XPGCHP2 | |
Semi-prep Cartridge Holder | Inner diameter: 10 mm | XPCHSPW1 |
Inner diameter: 20 mm | XPGHFSP20ID | |
Inner diameter: 30 mm | XPGHFSP30ID |
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 20 | TB30SP9-02Q1PT |
2.1 X 30 | TB30SP9-03Q1PT | ||
2.1 X 50 | TB30SP9-05Q1PT | ||
2.1 X 75 | TB30SP9-L5Q1PT | ||
2.1 X 100 | TB30SP9-10Q1PT | ||
2.1 X 150 | TB30SP9-15Q1PT | ||
3.0 X 50 | TB30SP9-0503PT | ||
3.0 X 75 | TB30SP9-L503PT | ||
3.0 X 100 | TB30SP9-1003PT | ||
3.0 X 150 | TB30SP9-1503PT | ||
3 | 300 | 2.1 X 20 | TB30S03-02Q1PTH |
2.1 X 33 | TB30S03-H3Q1PTH | ||
2.1 X 50 | TB30S03-05Q1PTH | ||
2.1 X 75 | TB30S03-L5Q1PTH | ||
2.1 X 100 | TB30S03-10Q1PTH | ||
2.1 X 150 | TB30S03-15Q1PTH | ||
3.0 X 50 | TB30S03-0503PTH | ||
3.0 X 75 | TB30S03-L503PTH | ||
3.0 X 100 | TB30S03-1003PTH | ||
3.0 X 150 | TB30S03-1503PTH | ||
4.6 X 33 | TB30S03-H346PTH | ||
4.6 X 50 | TB30S03-0546PTH | ||
4.6 X 75 | TB30S03-L546PTH | ||
4.6 X 100 | TB30S03-1046PTH | ||
4.6 X 150 | TB30S03-1546PTH | ||
4.6 X 250 | TB30S03-2546PTH | ||
5 | 300 | 2.1 X 20 | TB30S05-02Q1PTH |
2.1 X 33 | TB30S05-H3Q1PTH | ||
2.1 X 50 | TB30S05-05Q1PTH | ||
2.1 X 75 | TB30S05-L5Q1PTH | ||
2.1 X 100 | TB30S05-10Q1PTH | ||
2.1 X 150 | TB30S05-15Q1PTH | ||
3.0 X 50 | TB30S05-0503PTH | ||
3.0 X 75 | TB30S05-L503PTH | ||
3.0 X 100 | TB30S05-1003PTH | ||
3.0 X 150 | TB30S05-1503PTH | ||
4.0 X 150 | TB30S05-1504PTH | ||
4.0 X 250 | TB30S05-2504PTH | ||
4.6 X 33 | TB30S05-H346PTH | ||
4.6 X 50 | TB30S05-0546PTH | ||
4.6 X 75 | TB30S05-L546PTH | ||
4.6 X 100 | TB30S05-1046PTH | ||
4.6 X 150 | TB30S05-1546PTH | ||
4.6 X 250 | TB30S05-2546PTH |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 10 X 150 | TB30S05-1510WT |
10 X 250 | TB30S05-2510WT |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 20 X 50 | TB30S05-0520WX |
20 X 100 | TB30S05-1020WX | ||
20 X 150 | TB30S05-1520WX | ||
20 X 250 | TB30S05-2520WX | ||
30 X 50 | TB30S05-0530WX | ||
30 X 75 | TB30S05-L530WX | ||
30 X 100 | TB30S05-1030WX | ||
30 X 150 | TB30S05-1530WX | ||
30 X 250 | TB30S05-2530WX |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 5 | TB30SP9-E5Q1CC |
3.0 X 5 | TB30SP9-E503CC |
* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
/pack | Product Number |
---|---|---|---|---|
3 | 300 | 2.1 X 10 | 5 | TB30S03-01Q1GC |
1 | TB30S03-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S03-02Q1GC | ||
1 | TB30S03-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S03-0103GC | ||
1 | TB30S03-0103GC-1 | |||
3.0 X 20 | 5 | TB30S03-0203GC | ||
1 | TB30S03-0203GC-1 | |||
4.0 X 10 | 5 | TB30S03-0104GC | ||
1 | TB30S03-0104GC-1 | |||
4.0 X 20 | 5 | TB30S03-0204GC | ||
1 | TB30S03-0204GC-1 | |||
5 | 300 | 2.1 X 10 | 5 | TB30S05-01Q1GC |
1 | TB30S05-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S05-02Q1GC | ||
1 | TB30S05-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S05-0103GC | ||
1 | TB30S05-0103GC-1 | |||
3.0 X 20 | 5 | TB30S05-0203GC | ||
1 | TB30S05-0203GC-1 | |||
4.0 X 10 | 5 | TB30S05-0104GC | ||
1 | TB30S05-0104GC-1 | |||
4.0 X 20 | 5 | TB30S05-0204GC | ||
1 | TB30S05-0204GC-1 | |||
10 X 10 | 2 | TB30S05-0110CC | ||
20 X 10 | 2 | TB30S05-0120CCN | ||
30 X 10 | 2 | TB30S05-0130CCN |
* When using it for the first time, please purchase the cartridge holder corresponding to size of column.
Product Number | ||
---|---|---|
EXP®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included) |
XPCHUHP | |
Cartridge holder | length: 10 mm | XPGCHP1 |
length: 20 mm | XPGCHP2 | |
Semi-prep Cartridge Holder | Inner diameter: 10 mm | XPCHSPW1 |
Inner diameter: 20 mm | XPGHFSP20ID | |
Inner diameter: 30 mm | XPGHFSP30ID |
* EXP is a registered trademark of Optimize Technologies, Inc.
In the analysis of intact antibodies from 40°C up to 90°C, good peak shape was obtained at 70°C and onwards. Its excellent durability enables analysis of antibodies even at high temperature up to 90°C.
Column | YMC-Triart Bio C4 (3 µm, 300 Å) 150 X 3.0 mmI.D. |
Eluent | A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 30-60%B (0-15 min), 90%B (15-30 min) |
Flow rate | 0.4 mL/min |
Detection | UV at 220 nm |
Sample | Humanized monoclonal IgG1 |
Injection | 4 µL |
Good peak shape was obtained using YMC-Triart Bio C4 compared to competitor C4. As YMC-Triart Bio C4 is compatible with mobile phase containing formic acid, it is suitable for LC-MS analysis.
Column size | 150 X 3.0 mmI.D or 4.6 mml.D. |
Eluent | A) water/formic acid (100/0.1) B) acetonitrile/formid acid (100/0.1) 10-95%B (0-15 min) |
Flow rate | 0.4 mL/min for 3.0 mml.D. 1.0 mL/min for 4.6 mml.D. |
Temperature | 40℃ |
Detection | UV at 220 nm |
In the analysis of intact antibodies from 40°C up to 90°C, good peak shape was obtained at 70°C and onwards. Its excellent durability enables analysis of antibodies even at high temperature up to 90°C.
Column | YMC-Triart Bio C4 (3 µm, 300 Å) 150 X 3.0 mmI.D. |
Eluent | A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 30-60%B (0-15 min), 90%B (15-30 min) |
Flow rate | 0.4 mL/min |
Detection | UV at 220 nm |
Sample | Humanized monoclonal IgG1 |
Injection | 4 µL |
Good peak shape was obtained using YMC-Triart Bio C4 compared to competitor C4. As YMC-Triart Bio C4 is compatible with mobile phase containing formic acid, it is suitable for LC-MS analysis.
Column size | 150 X 3.0 mmI.D or 4.6 mml.D. |
Eluent | A) water/formic acid (100/0.1) B) acetonitrile/formid acid (100/0.1) 10-95%B (0-15 min) |
Flow rate | 0.4 mL/min for 3.0 mml.D. 1.0 mL/min for 4.6 mml.D. |
Temperature | 40℃ |
Detection | UV at 220 nm |
In the analysis of intact antibodies from 40°C up to 90°C, good peak shape was obtained at 70°C and onwards. Its excellent durability enables analysis of antibodies even at high temperature up to 90°C.
Column | YMC-Triart Bio C4 (3 µm, 300 Å) 150 X 3.0 mmI.D. |
Eluent | A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 30-60%B (0-15 min), 90%B (15-30 min) |
Flow rate | 0.4 mL/min |
Detection | UV at 220 nm |
Sample | Humanized monoclonal IgG1 |
Injection | 4 µL |
Good peak shape was obtained using YMC-Triart Bio C4 compared to competitor C4. As YMC-Triart Bio C4 is compatible with mobile phase containing formic acid, it is suitable for LC-MS analysis.
Column size | 150 X 3.0 mmI.D or 4.6 mml.D. |
Eluent | A) water/formic acid (100/0.1) B) acetonitrile/formid acid (100/0.1) 10-95%B (0-15 min) |
Flow rate | 0.4 mL/min for 3.0 mml.D. 1.0 mL/min for 4.6 mml.D. |
Temperature | 40℃ |
Detection | UV at 220 nm |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 20 | TB30SP9-02Q1PT |
2.1 X 30 | TB30SP9-03Q1PT | ||
2.1 X 50 | TB30SP9-05Q1PT | ||
2.1 X 75 | TB30SP9-L5Q1PT | ||
2.1 X 100 | TB30SP9-10Q1PT | ||
2.1 X 150 | TB30SP9-15Q1PT | ||
3.0 X 50 | TB30SP9-0503PT | ||
3.0 X 75 | TB30SP9-L503PT | ||
3.0 X 100 | TB30SP9-1003PT | ||
3.0 X 150 | TB30SP9-1503PT | ||
3 | 300 | 2.1 X 20 | TB30S03-02Q1PTH |
2.1 X 33 | TB30S03-H3Q1PTH | ||
2.1 X 50 | TB30S03-05Q1PTH | ||
2.1 X 75 | TB30S03-L5Q1PTH | ||
2.1 X 100 | TB30S03-10Q1PTH | ||
2.1 X 150 | TB30S03-15Q1PTH | ||
3.0 X 50 | TB30S03-0503PTH | ||
3.0 X 75 | TB30S03-L503PTH | ||
3.0 X 100 | TB30S03-1003PTH | ||
3.0 X 150 | TB30S03-1503PTH | ||
4.6 X 33 | TB30S03-H346PTH | ||
4.6 X 50 | TB30S03-0546PTH | ||
4.6 X 75 | TB30S03-L546PTH | ||
4.6 X 100 | TB30S03-1046PTH | ||
4.6 X 150 | TB30S03-1546PTH | ||
4.6 X 250 | TB30S03-2546PTH | ||
5 | 300 | 2.1 X 20 | TB30S05-02Q1PTH |
2.1 X 33 | TB30S05-H3Q1PTH | ||
2.1 X 50 | TB30S05-05Q1PTH | ||
2.1 X 75 | TB30S05-L5Q1PTH | ||
2.1 X 100 | TB30S05-10Q1PTH | ||
2.1 X 150 | TB30S05-15Q1PTH | ||
3.0 X 50 | TB30S05-0503PTH | ||
3.0 X 75 | TB30S05-L503PTH | ||
3.0 X 100 | TB30S05-1003PTH | ||
3.0 X 150 | TB30S05-1503PTH | ||
4.0 X 150 | TB30S05-1504PTH | ||
4.0 X 250 | TB30S05-2504PTH | ||
4.6 X 33 | TB30S05-H346PTH | ||
4.6 X 50 | TB30S05-0546PTH | ||
4.6 X 75 | TB30S05-L546PTH | ||
4.6 X 100 | TB30S05-1046PTH | ||
4.6 X 150 | TB30S05-1546PTH | ||
4.6 X 250 | TB30S05-2546PTH |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 10 X 150 | TB30S05-1510WT |
10 X 250 | TB30S05-2510WT |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 20 X 50 | TB30S05-0520WX |
20 X 100 | TB30S05-1020WX | ||
20 X 150 | TB30S05-1520WX | ||
20 X 250 | TB30S05-2520WX | ||
30 X 50 | TB30S05-0530WX | ||
30 X 75 | TB30S05-L530WX | ||
30 X 100 | TB30S05-1030WX | ||
30 X 150 | TB30S05-1530WX | ||
30 X 250 | TB30S05-2530WX |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 5 | TB30SP9-E5Q1CC |
3.0 X 5 | TB30SP9-E503CC |
* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
/pack | Product Number |
---|---|---|---|---|
3 | 300 | 2.1 X 10 | 5 | TB30S03-01Q1GC |
1 | TB30S03-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S03-02Q1GC | ||
1 | TB30S03-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S03-0103GC | ||
1 | TB30S03-0103GC-1 | |||
3.0 X 20 | 5 | TB30S03-0203GC | ||
1 | TB30S03-0203GC-1 | |||
4.0 X 10 | 5 | TB30S03-0104GC | ||
1 | TB30S03-0104GC-1 | |||
4.0 X 20 | 5 | TB30S03-0204GC | ||
1 | TB30S03-0204GC-1 | |||
5 | 300 | 2.1 X 10 | 5 | TB30S05-01Q1GC |
1 | TB30S05-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S05-02Q1GC | ||
1 | TB30S05-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S05-0103GC | ||
1 | TB30S05-0103GC-1 | |||
3.0 X 20 | 5 | TB30S05-0203GC | ||
1 | TB30S05-0203GC-1 | |||
4.0 X 10 | 5 | TB30S05-0104GC | ||
1 | TB30S05-0104GC-1 | |||
4.0 X 20 | 5 | TB30S05-0204GC | ||
1 | TB30S05-0204GC-1 | |||
10 X 10 | 2 | TB30S05-0110CC | ||
20 X 10 | 2 | TB30S05-0120CCN | ||
30 X 10 | 2 | TB30S05-0130CCN |
* When using it for the first time, please purchase the cartridge holder corresponding to size of column.
Product Number | ||
---|---|---|
EXP®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included) |
XPCHUHP | |
Cartridge holder | length: 10 mm | XPGCHP1 |
length: 20 mm | XPGCHP2 | |
Semi-prep Cartridge Holder | Inner diameter: 10 mm | XPCHSPW1 |
Inner diameter: 20 mm | XPGHFSP20ID | |
Inner diameter: 30 mm | XPGHFSP30ID |
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 20 | TB30SP9-02Q1PT |
2.1 X 30 | TB30SP9-03Q1PT | ||
2.1 X 50 | TB30SP9-05Q1PT | ||
2.1 X 75 | TB30SP9-L5Q1PT | ||
2.1 X 100 | TB30SP9-10Q1PT | ||
2.1 X 150 | TB30SP9-15Q1PT | ||
3.0 X 50 | TB30SP9-0503PT | ||
3.0 X 75 | TB30SP9-L503PT | ||
3.0 X 100 | TB30SP9-1003PT | ||
3.0 X 150 | TB30SP9-1503PT | ||
3 | 300 | 2.1 X 20 | TB30S03-02Q1PTH |
2.1 X 33 | TB30S03-H3Q1PTH | ||
2.1 X 50 | TB30S03-05Q1PTH | ||
2.1 X 75 | TB30S03-L5Q1PTH | ||
2.1 X 100 | TB30S03-10Q1PTH | ||
2.1 X 150 | TB30S03-15Q1PTH | ||
3.0 X 50 | TB30S03-0503PTH | ||
3.0 X 75 | TB30S03-L503PTH | ||
3.0 X 100 | TB30S03-1003PTH | ||
3.0 X 150 | TB30S03-1503PTH | ||
4.6 X 33 | TB30S03-H346PTH | ||
4.6 X 50 | TB30S03-0546PTH | ||
4.6 X 75 | TB30S03-L546PTH | ||
4.6 X 100 | TB30S03-1046PTH | ||
4.6 X 150 | TB30S03-1546PTH | ||
4.6 X 250 | TB30S03-2546PTH | ||
5 | 300 | 2.1 X 20 | TB30S05-02Q1PTH |
2.1 X 33 | TB30S05-H3Q1PTH | ||
2.1 X 50 | TB30S05-05Q1PTH | ||
2.1 X 75 | TB30S05-L5Q1PTH | ||
2.1 X 100 | TB30S05-10Q1PTH | ||
2.1 X 150 | TB30S05-15Q1PTH | ||
3.0 X 50 | TB30S05-0503PTH | ||
3.0 X 75 | TB30S05-L503PTH | ||
3.0 X 100 | TB30S05-1003PTH | ||
3.0 X 150 | TB30S05-1503PTH | ||
4.0 X 150 | TB30S05-1504PTH | ||
4.0 X 250 | TB30S05-2504PTH | ||
4.6 X 33 | TB30S05-H346PTH | ||
4.6 X 50 | TB30S05-0546PTH | ||
4.6 X 75 | TB30S05-L546PTH | ||
4.6 X 100 | TB30S05-1046PTH | ||
4.6 X 150 | TB30S05-1546PTH | ||
4.6 X 250 | TB30S05-2546PTH |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 10 X 150 | TB30S05-1510WT |
10 X 250 | TB30S05-2510WT |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 20 X 50 | TB30S05-0520WX |
20 X 100 | TB30S05-1020WX | ||
20 X 150 | TB30S05-1520WX | ||
20 X 250 | TB30S05-2520WX | ||
30 X 50 | TB30S05-0530WX | ||
30 X 75 | TB30S05-L530WX | ||
30 X 100 | TB30S05-1030WX | ||
30 X 150 | TB30S05-1530WX | ||
30 X 250 | TB30S05-2530WX |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 5 | TB30SP9-E5Q1CC |
3.0 X 5 | TB30SP9-E503CC |
* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
/pack | Product Number |
---|---|---|---|---|
3 | 300 | 2.1 X 10 | 5 | TB30S03-01Q1GC |
1 | TB30S03-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S03-02Q1GC | ||
1 | TB30S03-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S03-0103GC | ||
1 | TB30S03-0103GC-1 | |||
3.0 X 20 | 5 | TB30S03-0203GC | ||
1 | TB30S03-0203GC-1 | |||
4.0 X 10 | 5 | TB30S03-0104GC | ||
1 | TB30S03-0104GC-1 | |||
4.0 X 20 | 5 | TB30S03-0204GC | ||
1 | TB30S03-0204GC-1 | |||
5 | 300 | 2.1 X 10 | 5 | TB30S05-01Q1GC |
1 | TB30S05-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S05-02Q1GC | ||
1 | TB30S05-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S05-0103GC | ||
1 | TB30S05-0103GC-1 | |||
3.0 X 20 | 5 | TB30S05-0203GC | ||
1 | TB30S05-0203GC-1 | |||
4.0 X 10 | 5 | TB30S05-0104GC | ||
1 | TB30S05-0104GC-1 | |||
4.0 X 20 | 5 | TB30S05-0204GC | ||
1 | TB30S05-0204GC-1 | |||
10 X 10 | 2 | TB30S05-0110CC | ||
20 X 10 | 2 | TB30S05-0120CCN | ||
30 X 10 | 2 | TB30S05-0130CCN |
* When using it for the first time, please purchase the cartridge holder corresponding to size of column.
Product Number | ||
---|---|---|
EXP®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included) |
XPCHUHP | |
Cartridge holder | length: 10 mm | XPGCHP1 |
length: 20 mm | XPGCHP2 | |
Semi-prep Cartridge Holder | Inner diameter: 10 mm | XPCHSPW1 |
Inner diameter: 20 mm | XPGHFSP20ID | |
Inner diameter: 30 mm | XPGHFSP30ID |
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 20 | TB30SP9-02Q1PT |
2.1 X 30 | TB30SP9-03Q1PT | ||
2.1 X 50 | TB30SP9-05Q1PT | ||
2.1 X 75 | TB30SP9-L5Q1PT | ||
2.1 X 100 | TB30SP9-10Q1PT | ||
2.1 X 150 | TB30SP9-15Q1PT | ||
3.0 X 50 | TB30SP9-0503PT | ||
3.0 X 75 | TB30SP9-L503PT | ||
3.0 X 100 | TB30SP9-1003PT | ||
3.0 X 150 | TB30SP9-1503PT | ||
3 | 300 | 2.1 X 20 | TB30S03-02Q1PTH |
2.1 X 33 | TB30S03-H3Q1PTH | ||
2.1 X 50 | TB30S03-05Q1PTH | ||
2.1 X 75 | TB30S03-L5Q1PTH | ||
2.1 X 100 | TB30S03-10Q1PTH | ||
2.1 X 150 | TB30S03-15Q1PTH | ||
3.0 X 50 | TB30S03-0503PTH | ||
3.0 X 75 | TB30S03-L503PTH | ||
3.0 X 100 | TB30S03-1003PTH | ||
3.0 X 150 | TB30S03-1503PTH | ||
4.6 X 33 | TB30S03-H346PTH | ||
4.6 X 50 | TB30S03-0546PTH | ||
4.6 X 75 | TB30S03-L546PTH | ||
4.6 X 100 | TB30S03-1046PTH | ||
4.6 X 150 | TB30S03-1546PTH | ||
4.6 X 250 | TB30S03-2546PTH | ||
5 | 300 | 2.1 X 20 | TB30S05-02Q1PTH |
2.1 X 33 | TB30S05-H3Q1PTH | ||
2.1 X 50 | TB30S05-05Q1PTH | ||
2.1 X 75 | TB30S05-L5Q1PTH | ||
2.1 X 100 | TB30S05-10Q1PTH | ||
2.1 X 150 | TB30S05-15Q1PTH | ||
3.0 X 50 | TB30S05-0503PTH | ||
3.0 X 75 | TB30S05-L503PTH | ||
3.0 X 100 | TB30S05-1003PTH | ||
3.0 X 150 | TB30S05-1503PTH | ||
4.0 X 150 | TB30S05-1504PTH | ||
4.0 X 250 | TB30S05-2504PTH | ||
4.6 X 33 | TB30S05-H346PTH | ||
4.6 X 50 | TB30S05-0546PTH | ||
4.6 X 75 | TB30S05-L546PTH | ||
4.6 X 100 | TB30S05-1046PTH | ||
4.6 X 150 | TB30S05-1546PTH | ||
4.6 X 250 | TB30S05-2546PTH |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 10 X 150 | TB30S05-1510WT |
10 X 250 | TB30S05-2510WT |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 20 X 50 | TB30S05-0520WX |
20 X 100 | TB30S05-1020WX | ||
20 X 150 | TB30S05-1520WX | ||
20 X 250 | TB30S05-2520WX | ||
30 X 50 | TB30S05-0530WX | ||
30 X 75 | TB30S05-L530WX | ||
30 X 100 | TB30S05-1030WX | ||
30 X 150 | TB30S05-1530WX | ||
30 X 250 | TB30S05-2530WX |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 5 | TB30SP9-E5Q1CC |
3.0 X 5 | TB30SP9-E503CC |
* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
/pack | Product Number |
---|---|---|---|---|
3 | 300 | 2.1 X 10 | 5 | TB30S03-01Q1GC |
1 | TB30S03-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S03-02Q1GC | ||
1 | TB30S03-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S03-0103GC | ||
1 | TB30S03-0103GC-1 | |||
3.0 X 20 | 5 | TB30S03-0203GC | ||
1 | TB30S03-0203GC-1 | |||
4.0 X 10 | 5 | TB30S03-0104GC | ||
1 | TB30S03-0104GC-1 | |||
4.0 X 20 | 5 | TB30S03-0204GC | ||
1 | TB30S03-0204GC-1 | |||
5 | 300 | 2.1 X 10 | 5 | TB30S05-01Q1GC |
1 | TB30S05-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S05-02Q1GC | ||
1 | TB30S05-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S05-0103GC | ||
1 | TB30S05-0103GC-1 | |||
3.0 X 20 | 5 | TB30S05-0203GC | ||
1 | TB30S05-0203GC-1 | |||
4.0 X 10 | 5 | TB30S05-0104GC | ||
1 | TB30S05-0104GC-1 | |||
4.0 X 20 | 5 | TB30S05-0204GC | ||
1 | TB30S05-0204GC-1 | |||
10 X 10 | 2 | TB30S05-0110CC | ||
20 X 10 | 2 | TB30S05-0120CCN | ||
30 X 10 | 2 | TB30S05-0130CCN |
* When using it for the first time, please purchase the cartridge holder corresponding to size of column.
Product Number | ||
---|---|---|
EXP®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included) |
XPCHUHP | |
Cartridge holder | length: 10 mm | XPGCHP1 |
length: 20 mm | XPGCHP2 | |
Semi-prep Cartridge Holder | Inner diameter: 10 mm | XPCHSPW1 |
Inner diameter: 20 mm | XPGHFSP20ID | |
Inner diameter: 30 mm | XPGHFSP30ID |
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 20 | TB30SP9-02Q1PT |
2.1 X 30 | TB30SP9-03Q1PT | ||
2.1 X 50 | TB30SP9-05Q1PT | ||
2.1 X 75 | TB30SP9-L5Q1PT | ||
2.1 X 100 | TB30SP9-10Q1PT | ||
2.1 X 150 | TB30SP9-15Q1PT | ||
3.0 X 50 | TB30SP9-0503PT | ||
3.0 X 75 | TB30SP9-L503PT | ||
3.0 X 100 | TB30SP9-1003PT | ||
3.0 X 150 | TB30SP9-1503PT | ||
3 | 300 | 2.1 X 20 | TB30S03-02Q1PTH |
2.1 X 33 | TB30S03-H3Q1PTH | ||
2.1 X 50 | TB30S03-05Q1PTH | ||
2.1 X 75 | TB30S03-L5Q1PTH | ||
2.1 X 100 | TB30S03-10Q1PTH | ||
2.1 X 150 | TB30S03-15Q1PTH | ||
3.0 X 50 | TB30S03-0503PTH | ||
3.0 X 75 | TB30S03-L503PTH | ||
3.0 X 100 | TB30S03-1003PTH | ||
3.0 X 150 | TB30S03-1503PTH | ||
4.6 X 33 | TB30S03-H346PTH | ||
4.6 X 50 | TB30S03-0546PTH | ||
4.6 X 75 | TB30S03-L546PTH | ||
4.6 X 100 | TB30S03-1046PTH | ||
4.6 X 150 | TB30S03-1546PTH | ||
4.6 X 250 | TB30S03-2546PTH | ||
5 | 300 | 2.1 X 20 | TB30S05-02Q1PTH |
2.1 X 33 | TB30S05-H3Q1PTH | ||
2.1 X 50 | TB30S05-05Q1PTH | ||
2.1 X 75 | TB30S05-L5Q1PTH | ||
2.1 X 100 | TB30S05-10Q1PTH | ||
2.1 X 150 | TB30S05-15Q1PTH | ||
3.0 X 50 | TB30S05-0503PTH | ||
3.0 X 75 | TB30S05-L503PTH | ||
3.0 X 100 | TB30S05-1003PTH | ||
3.0 X 150 | TB30S05-1503PTH | ||
4.0 X 150 | TB30S05-1504PTH | ||
4.0 X 250 | TB30S05-2504PTH | ||
4.6 X 33 | TB30S05-H346PTH | ||
4.6 X 50 | TB30S05-0546PTH | ||
4.6 X 75 | TB30S05-L546PTH | ||
4.6 X 100 | TB30S05-1046PTH | ||
4.6 X 150 | TB30S05-1546PTH | ||
4.6 X 250 | TB30S05-2546PTH |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 10 X 150 | TB30S05-1510WT |
10 X 250 | TB30S05-2510WT |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
5 | 300 | 20 X 50 | TB30S05-0520WX |
20 X 100 | TB30S05-1020WX | ||
20 X 150 | TB30S05-1520WX | ||
20 X 250 | TB30S05-2520WX | ||
30 X 50 | TB30S05-0530WX | ||
30 X 75 | TB30S05-L530WX | ||
30 X 100 | TB30S05-1030WX | ||
30 X 150 | TB30S05-1530WX | ||
30 X 250 | TB30S05-2530WX |
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
Product Number |
---|---|---|---|
1.9 | 300 | 2.1 X 5 | TB30SP9-E5Q1CC |
3.0 X 5 | TB30SP9-E503CC |
* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.
Particle size (µm) |
Pore size (Ã…) |
Column size Inner diameter X length (mm) |
/pack | Product Number |
---|---|---|---|---|
3 | 300 | 2.1 X 10 | 5 | TB30S03-01Q1GC |
1 | TB30S03-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S03-02Q1GC | ||
1 | TB30S03-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S03-0103GC | ||
1 | TB30S03-0103GC-1 | |||
3.0 X 20 | 5 | TB30S03-0203GC | ||
1 | TB30S03-0203GC-1 | |||
4.0 X 10 | 5 | TB30S03-0104GC | ||
1 | TB30S03-0104GC-1 | |||
4.0 X 20 | 5 | TB30S03-0204GC | ||
1 | TB30S03-0204GC-1 | |||
5 | 300 | 2.1 X 10 | 5 | TB30S05-01Q1GC |
1 | TB30S05-01Q1GC-1 | |||
2.1 X 20 | 5 | TB30S05-02Q1GC | ||
1 | TB30S05-02Q1GC-1 | |||
3.0 X 10 | 5 | TB30S05-0103GC | ||
1 | TB30S05-0103GC-1 | |||
3.0 X 20 | 5 | TB30S05-0203GC | ||
1 | TB30S05-0203GC-1 | |||
4.0 X 10 | 5 | TB30S05-0104GC | ||
1 | TB30S05-0104GC-1 | |||
4.0 X 20 | 5 | TB30S05-0204GC | ||
1 | TB30S05-0204GC-1 | |||
10 X 10 | 2 | TB30S05-0110CC | ||
20 X 10 | 2 | TB30S05-0120CCN | ||
30 X 10 | 2 | TB30S05-0130CCN |
* When using it for the first time, please purchase the cartridge holder corresponding to size of column.
Product Number | ||
---|---|---|
EXP®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included) |
XPCHUHP | |
Cartridge holder | length: 10 mm | XPGCHP1 |
length: 20 mm | XPGCHP2 | |
Semi-prep Cartridge Holder | Inner diameter: 10 mm | XPCHSPW1 |
Inner diameter: 20 mm | XPGHFSP20ID | |
Inner diameter: 30 mm | XPGHFSP30ID |
* EXP is a registered trademark of Optimize Technologies, Inc.
150 Beach Road, #25-02 Gateway West, Singapore 189720.
Tel : +65 6392 2643
Fax : +65 6392 2856
Email : sales@ymc.sg
150 Beach Road, #25-02 Gateway West, Singapore 189720.
Subscribe now and get the interesting information from us.