YMC-Triart Bio C18

Home » Products » YMC-Triart Bio C18

YMC-Triart Bio C18

YMC-Triart Bio C18, which is a wide-pore column with organic/inorganic hybrid silica, is suitable for separation of peptides, proteins and oligonucleotides. YMC-Triart Bio C18 can be used to shorten the analysis time of compounds which are strongly retained on conventional C18 columns due to its low hydrophobicity. Its excellent durability enables it to be used at 90°C at pH 1-7, and 50°C at pH 7-12.

Catalogue Download Link

Column care and use instruction download link

YMC-Triart Bio C18

Catalogue Download Link

Column care and use instruction download link

Specification:

Base

Organic/inorganic hybrid silica

Base

Organic/inorganic hybrid silica

Stationary phase

USP L1, C18

Stationary phase

USP L1, C18

Particle size

1.9 μm, 3 μm, 5 μm

Particle size

1.9 μm, 3 μm, 5 μm

Pore size

300 Å

Pore size

300 Å

Usable pH range

1 ~12

Usable pH range

1 ~12

Endcapping

Yes

Endcapping

Yes

Specification:

Base

Organic/inorganic hybrid silica

Base

Organic/inorganic hybrid silica

Stationary phase

USP L1, C18

Stationary phase

USP L1, C18

Particle size

1.9 μm, 3 μm, 5 μm

Particle size

1.9 μm, 3 μm, 5 μm

Pore size

300 Å

Pore size

300 Å

Usable pH range

1 ~12

Usable pH range

1 ~12

Endcapping

Yes

Endcapping

Yes

Specification:

Base

Organic/inorganic hybrid silica

Base

Organic/inorganic hybrid silica

Stationary phase

USP L1, C18

Stationary phase

USP L1, C18

Particle size

1.9 μm, 3 μm, 5 μm

Particle size

1.9 μm, 3 μm, 5 μm

Pore size

300 Å

Pore size

300 Å

Usable pH range

1 ~12

Usable pH range

1 ~12

Endcapping

Yes

Endcapping

Yes

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

The widths at half the peak height (WHPH) were compared when peptides and proteins with molecular weight (MW) from 1,859 to 76,000 were separated using Triart Bio C18 and Triart Bio C4 with pore size 300 Å, and Triart C18 with pore size 120 Å. Peak broadening was observed with Triart C18 whereas good peak shape was obtained using wide-pore column Triart Bio C18 and Triart Bio C4. Triart Bio C18 and Triart Bio C4 are suitable for separation of peptides and proteins with molecular weight over 10 kDa.

Column	150 X 3.0 mmI.D.
Eluent	A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 10-95%B (0-15 min)
Flow rate	0.425 mL/min
Temperature	40ºC
Detection	UV at 220 nm
Injection	4 µL (0.1-0.5 mg/mL)
Sample	γ-Endorphin (MW 1,859), Insulin (MW 5,733), Lysozyme (MW 14,000), β-Lactoglobulin (MW 18,363), α-Chymotrypsinogen A (MW 25,656), BSA (MW 66,000), Conalbumin (MW 76,000)

Good peak shape with mobile phase suitable for LC/MS

Good peak shape can be achieved with mobile phase containing formic acid so Triart Bio C18 is suitable for LC-MS analysis.

Column	150 X 3.0 mmI.D., 150 X 4.6 mmI.D.
Eluent	A) water/formic acid (100/0.1) B) acetonitrile/formic acid (100/0.08) 45-65%B (0-15 min)
Flow rate	0.425 mL/min for 3.0 mmI.D. 1.0 mL/min for 4.6 mmI.D.
Temperature	40ºC
Detection	UV at 220 nm
Sample	Human growth hormone (0.1 mg/mL)

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

Column	150 X 3.0 mmI.D.
Eluent	A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 10-95%B (0-15 min)
Flow rate	0.425 mL/min
Temperature	40ºC
Detection	UV at 220 nm
Injection	4 µL (0.1-0.5 mg/mL)
Sample	γ-Endorphin (MW 1,859), Insulin (MW 5,733), Lysozyme (MW 14,000), β-Lactoglobulin (MW 18,363), α-Chymotrypsinogen A (MW 25,656), BSA (MW 66,000), Conalbumin (MW 76,000)

Good peak shape with mobile phase suitable for LC/MS

Good peak shape can be achieved with mobile phase containing formic acid so Triart Bio C18 is suitable for LC-MS analysis.

Column	150 X 3.0 mmI.D., 150 X 4.6 mmI.D.
Eluent	A) water/formic acid (100/0.1) B) acetonitrile/formic acid (100/0.08) 45-65%B (0-15 min)
Flow rate	0.425 mL/min for 3.0 mmI.D. 1.0 mL/min for 4.6 mmI.D.
Temperature	40ºC
Detection	UV at 220 nm
Sample	Human growth hormone (0.1 mg/mL)

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

Column	150 X 3.0 mmI.D.
Eluent	A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 10-95%B (0-15 min)
Flow rate	0.425 mL/min
Temperature	40ºC
Detection	UV at 220 nm
Injection	4 µL (0.1-0.5 mg/mL)
Sample	γ-Endorphin (MW 1,859), Insulin (MW 5,733), Lysozyme (MW 14,000), β-Lactoglobulin (MW 18,363), α-Chymotrypsinogen A (MW 25,656), BSA (MW 66,000), Conalbumin (MW 76,000)

Good peak shape with mobile phase suitable for LC/MS

Good peak shape can be achieved with mobile phase containing formic acid so Triart Bio C18 is suitable for LC-MS analysis.

Column	150 X 3.0 mmI.D., 150 X 4.6 mmI.D.
Eluent	A) water/formic acid (100/0.1) B) acetonitrile/formic acid (100/0.08) 45-65%B (0-15 min)
Flow rate	0.425 mL/min for 3.0 mmI.D. 1.0 mL/min for 4.6 mmI.D.
Temperature	40ºC
Detection	UV at 220 nm
Sample	Human growth hormone (0.1 mg/mL)

Analytical Columns (Max. pressure : 100 MPa for 1.9 µm, 45 MPa for 3 µm and 5 µm)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 20	TA30SP9-02Q1PT
		2.1 X 30	TA30SP9-03Q1PT
		2.1 X 50	TA30SP9-05Q1PT
		2.1 X 75	TA30SP9-L5Q1PT
		2.1 X 100	TA30SP9-10Q1PT
		2.1 X 150	TA30SP9-15Q1PT
		3.0 X 50	TA30SP9-0503PT
		3.0 X 75	TA30SP9-L503PT
		3.0 X 100	TA30SP9-1003PT
		3.0 X 150	TA30SP9-1503PT
3	300	2.1 X 20	TA30S03-02Q1PTH
		2.1 X 33	TA30S03-H3Q1PTH
		2.1 X 50	TA30S03-05Q1PTH
		2.1 X 75	TA30S03-L5Q1PTH
		2.1 X 100	TA30S03-10Q1PTH
		2.1 X 150	TA30S03-15Q1PTH
		3.0 X 50	TA30S03-0503PTH
		3.0 X 75	TA30S03-L503PTH
		3.0 X 100	TA30S03-1003PTH
		3.0 X 150	TA30S03-1503PTH
		4.6 X 33	TA30S03-H346PTH
		4.6 X 50	TA30S03-0546PTH
		4.6 X 75	TA30S03-L546PTH
		4.6 X 100	TA30S03-1046PTH
		4.6 X 150	TA30S03-1546PTH
		4.6 X 250	TA30S03-2546PTH
5	300	2.1 X 20	TA30S05-02Q1PTH
		2.1 X 33	TA30S05-H3Q1PTH
		2.1 X 50	TA30S05-05Q1PTH
		2.1 X 75	TA30S05-L5Q1PTH
		2.1 X 100	TA30S05-10Q1PTH
		2.1 X 150	TA30S05-15Q1PTH
		3.0 X 50	TA30S05-0503PTH
		3.0 X 75	TA30S05-L503PTH
		3.0 X 100	TA30S05-1003PTH
		3.0 X 150	TA30S05-1503PTH
		4.0 X 150	TA30S05-1504PTH
		4.0 X 250	TA30S05-2504PTH
		4.6 X 33	TA30S05-H346PTH
		4.6 X 50	TA30S05-0546PTH
		4.6 X 75	TA30S05-L546PTH
		4.6 X 100	TA30S05-1046PTH
		4.6 X 150	TA30S05-1546PTH
		4.6 X 250	TA30S05-2546PTH

Semi-preparative Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	10 X 150	TA30S05-1510WT
5	300	10 X 250	TA30S05-2510WT

High Throughput Extended Life Semi-prep Columns (YMC-Actus Triart Bio C18)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	20 X 50	TA30S05-0520WX
		20 X 100	TA30S05-1020WX
		20 X 150	TA30S05-1520WX
		20 X 250	TA30S05-2520WX
		30 X 50	TA30S05-0530WX
		30 X 75	TA30S05-L530WX
		30 X 100	TA30S05-1030WX
		30 X 150	TA30S05-1530WX
		30 X 250	TA30S05-2530WX

EXP® Guard Cartridge Columns (Max. pressure: 100 MPa, 3/pack)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 5	TA30SP9-E5Q1CC
1.9	300	3.0 X 5	TA30SP9-E503CC

* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.

Guard Cartridge Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	/pack	Product Number
3	300	2.1 X 10	5	TA30S03-01Q1GC
		2.1 X 10	1	TA30S03-01Q1GC-1
		2.1 X 20	5	TA30S03-02Q1GC
		2.1 X 20	1	TA30S03-02Q1GC-1
		3.0 X 10	5	TA30S03-0103GC
		3.0 X 10	1	TA30S03-0103GC-1
		3.0 X 20	5	TA30S03-0203GC
		3.0 X 20	1	TA30S03-0203GC-1
		4.0 X 10	5	TA30S03-0104GC
		4.0 X 10	1	TA30S03-0104GC-1
		4.0 X 20	5	TA30S03-0204GC
		4.0 X 20	1	TA30S03-0204GC-1
5	300	2.1 X 10	5	TA30S05-01Q1GC
		2.1 X 10	1	TA30S05-01Q1GC-1
		2.1 X 20	5	TA30S05-02Q1GC
		2.1 X 20	1	TA30S05-02Q1GC-1
		3.0 X 10	5	TA30S05-0103GC
		3.0 X 10	1	TA30S05-0103GC-1
		3.0 X 20	5	TA30S05-0203GC
		3.0 X 20	1	TA30S05-0203GC-1
		4.0 X 10	5	TA30S05-0104GC
		4.0 X 10	1	TA30S05-0104GC-1
		4.0 X 20	5	TA30S05-0204GC
		4.0 X 20	1	TA30S05-0204GC-1
		10 X 10	2	TA30S05-0110CC
		20 X 10	2	TA30S05-0120CCN
		30 X 10	2	TA30S05-0130CCN

* When using it for the first time, please purchase the cartridge holder corresponding to size of column.

Cartridge holder

		Product Number
EXP^®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included)		XPCHUHP
Cartridge holder	length: 10 mm	XPGCHP1
Cartridge holder	length: 20 mm	XPGCHP2
Semi-prep Cartridge Holder	Inner diameter: 10 mm	XPCHSPW1
	Inner diameter: 20 mm	XPGHFSP20ID
	Inner diameter: 30 mm	XPGHFSP30ID

* EXP is a registered trademark of Optimize Technologies, Inc.

Analytical Columns (Max. pressure : 100 MPa for 1.9 µm, 45 MPa for 3 µm and 5 µm)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 20	TA30SP9-02Q1PT
		2.1 X 30	TA30SP9-03Q1PT
		2.1 X 50	TA30SP9-05Q1PT
		2.1 X 75	TA30SP9-L5Q1PT
		2.1 X 100	TA30SP9-10Q1PT
		2.1 X 150	TA30SP9-15Q1PT
		3.0 X 50	TA30SP9-0503PT
		3.0 X 75	TA30SP9-L503PT
		3.0 X 100	TA30SP9-1003PT
		3.0 X 150	TA30SP9-1503PT
3	300	2.1 X 20	TA30S03-02Q1PTH
		2.1 X 33	TA30S03-H3Q1PTH
		2.1 X 50	TA30S03-05Q1PTH
		2.1 X 75	TA30S03-L5Q1PTH
		2.1 X 100	TA30S03-10Q1PTH
		2.1 X 150	TA30S03-15Q1PTH
		3.0 X 50	TA30S03-0503PTH
		3.0 X 75	TA30S03-L503PTH
		3.0 X 100	TA30S03-1003PTH
		3.0 X 150	TA30S03-1503PTH
		4.6 X 33	TA30S03-H346PTH
		4.6 X 50	TA30S03-0546PTH
		4.6 X 75	TA30S03-L546PTH
		4.6 X 100	TA30S03-1046PTH
		4.6 X 150	TA30S03-1546PTH
		4.6 X 250	TA30S03-2546PTH
5	300	2.1 X 20	TA30S05-02Q1PTH
		2.1 X 33	TA30S05-H3Q1PTH
		2.1 X 50	TA30S05-05Q1PTH
		2.1 X 75	TA30S05-L5Q1PTH
		2.1 X 100	TA30S05-10Q1PTH
		2.1 X 150	TA30S05-15Q1PTH
		3.0 X 50	TA30S05-0503PTH
		3.0 X 75	TA30S05-L503PTH
		3.0 X 100	TA30S05-1003PTH
		3.0 X 150	TA30S05-1503PTH
		4.0 X 150	TA30S05-1504PTH
		4.0 X 250	TA30S05-2504PTH
		4.6 X 33	TA30S05-H346PTH
		4.6 X 50	TA30S05-0546PTH
		4.6 X 75	TA30S05-L546PTH
		4.6 X 100	TA30S05-1046PTH
		4.6 X 150	TA30S05-1546PTH
		4.6 X 250	TA30S05-2546PTH

Semi-preparative Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	10 X 150	TA30S05-1510WT
5	300	10 X 250	TA30S05-2510WT

High Throughput Extended Life Semi-prep Columns (YMC-Actus Triart Bio C18)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	20 X 50	TA30S05-0520WX
		20 X 100	TA30S05-1020WX
		20 X 150	TA30S05-1520WX
		20 X 250	TA30S05-2520WX
		30 X 50	TA30S05-0530WX
		30 X 75	TA30S05-L530WX
		30 X 100	TA30S05-1030WX
		30 X 150	TA30S05-1530WX
		30 X 250	TA30S05-2530WX

EXP® Guard Cartridge Columns (Max. pressure: 100 MPa, 3/pack)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 5	TA30SP9-E5Q1CC
1.9	300	3.0 X 5	TA30SP9-E503CC

* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.

Guard Cartridge Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	/pack	Product Number
3	300	2.1 X 10	5	TA30S03-01Q1GC
		2.1 X 10	1	TA30S03-01Q1GC-1
		2.1 X 20	5	TA30S03-02Q1GC
		2.1 X 20	1	TA30S03-02Q1GC-1
		3.0 X 10	5	TA30S03-0103GC
		3.0 X 10	1	TA30S03-0103GC-1
		3.0 X 20	5	TA30S03-0203GC
		3.0 X 20	1	TA30S03-0203GC-1
		4.0 X 10	5	TA30S03-0104GC
		4.0 X 10	1	TA30S03-0104GC-1
		4.0 X 20	5	TA30S03-0204GC
		4.0 X 20	1	TA30S03-0204GC-1
5	300	2.1 X 10	5	TA30S05-01Q1GC
		2.1 X 10	1	TA30S05-01Q1GC-1
		2.1 X 20	5	TA30S05-02Q1GC
		2.1 X 20	1	TA30S05-02Q1GC-1
		3.0 X 10	5	TA30S05-0103GC
		3.0 X 10	1	TA30S05-0103GC-1
		3.0 X 20	5	TA30S05-0203GC
		3.0 X 20	1	TA30S05-0203GC-1
		4.0 X 10	5	TA30S05-0104GC
		4.0 X 10	1	TA30S05-0104GC-1
		4.0 X 20	5	TA30S05-0204GC
		4.0 X 20	1	TA30S05-0204GC-1
		10 X 10	2	TA30S05-0110CC
		20 X 10	2	TA30S05-0120CCN
		30 X 10	2	TA30S05-0130CCN

* When using it for the first time, please purchase the cartridge holder corresponding to size of column.

Cartridge holder

		Product Number
EXP^®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included)		XPCHUHP
Cartridge holder	length: 10 mm	XPGCHP1
Cartridge holder	length: 20 mm	XPGCHP2
Semi-prep Cartridge Holder	Inner diameter: 10 mm	XPCHSPW1
	Inner diameter: 20 mm	XPGHFSP20ID
	Inner diameter: 30 mm	XPGHFSP30ID

* EXP is a registered trademark of Optimize Technologies, Inc.

Analytical Columns (Max. pressure : 100 MPa for 1.9 µm, 45 MPa for 3 µm and 5 µm)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 20	TA30SP9-02Q1PT
		2.1 X 30	TA30SP9-03Q1PT
		2.1 X 50	TA30SP9-05Q1PT
		2.1 X 75	TA30SP9-L5Q1PT
		2.1 X 100	TA30SP9-10Q1PT
		2.1 X 150	TA30SP9-15Q1PT
		3.0 X 50	TA30SP9-0503PT
		3.0 X 75	TA30SP9-L503PT
		3.0 X 100	TA30SP9-1003PT
		3.0 X 150	TA30SP9-1503PT
3	300	2.1 X 20	TA30S03-02Q1PTH
		2.1 X 33	TA30S03-H3Q1PTH
		2.1 X 50	TA30S03-05Q1PTH
		2.1 X 75	TA30S03-L5Q1PTH
		2.1 X 100	TA30S03-10Q1PTH
		2.1 X 150	TA30S03-15Q1PTH
		3.0 X 50	TA30S03-0503PTH
		3.0 X 75	TA30S03-L503PTH
		3.0 X 100	TA30S03-1003PTH
		3.0 X 150	TA30S03-1503PTH
		4.6 X 33	TA30S03-H346PTH
		4.6 X 50	TA30S03-0546PTH
		4.6 X 75	TA30S03-L546PTH
		4.6 X 100	TA30S03-1046PTH
		4.6 X 150	TA30S03-1546PTH
		4.6 X 250	TA30S03-2546PTH
5	300	2.1 X 20	TA30S05-02Q1PTH
		2.1 X 33	TA30S05-H3Q1PTH
		2.1 X 50	TA30S05-05Q1PTH
		2.1 X 75	TA30S05-L5Q1PTH
		2.1 X 100	TA30S05-10Q1PTH
		2.1 X 150	TA30S05-15Q1PTH
		3.0 X 50	TA30S05-0503PTH
		3.0 X 75	TA30S05-L503PTH
		3.0 X 100	TA30S05-1003PTH
		3.0 X 150	TA30S05-1503PTH
		4.0 X 150	TA30S05-1504PTH
		4.0 X 250	TA30S05-2504PTH
		4.6 X 33	TA30S05-H346PTH
		4.6 X 50	TA30S05-0546PTH
		4.6 X 75	TA30S05-L546PTH
		4.6 X 100	TA30S05-1046PTH
		4.6 X 150	TA30S05-1546PTH
		4.6 X 250	TA30S05-2546PTH

Semi-preparative Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	10 X 150	TA30S05-1510WT
5	300	10 X 250	TA30S05-2510WT

High Throughput Extended Life Semi-prep Columns (YMC-Actus Triart Bio C18)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	20 X 50	TA30S05-0520WX
		20 X 100	TA30S05-1020WX
		20 X 150	TA30S05-1520WX
		20 X 250	TA30S05-2520WX
		30 X 50	TA30S05-0530WX
		30 X 75	TA30S05-L530WX
		30 X 100	TA30S05-1030WX
		30 X 150	TA30S05-1530WX
		30 X 250	TA30S05-2530WX

EXP® Guard Cartridge Columns (Max. pressure: 100 MPa, 3/pack)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 5	TA30SP9-E5Q1CC
1.9	300	3.0 X 5	TA30SP9-E503CC

* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.

Guard Cartridge Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	/pack	Product Number
3	300	2.1 X 10	5	TA30S03-01Q1GC
		2.1 X 10	1	TA30S03-01Q1GC-1
		2.1 X 20	5	TA30S03-02Q1GC
		2.1 X 20	1	TA30S03-02Q1GC-1
		3.0 X 10	5	TA30S03-0103GC
		3.0 X 10	1	TA30S03-0103GC-1
		3.0 X 20	5	TA30S03-0203GC
		3.0 X 20	1	TA30S03-0203GC-1
		4.0 X 10	5	TA30S03-0104GC
		4.0 X 10	1	TA30S03-0104GC-1
		4.0 X 20	5	TA30S03-0204GC
		4.0 X 20	1	TA30S03-0204GC-1
5	300	2.1 X 10	5	TA30S05-01Q1GC
		2.1 X 10	1	TA30S05-01Q1GC-1
		2.1 X 20	5	TA30S05-02Q1GC
		2.1 X 20	1	TA30S05-02Q1GC-1
		3.0 X 10	5	TA30S05-0103GC
		3.0 X 10	1	TA30S05-0103GC-1
		3.0 X 20	5	TA30S05-0203GC
		3.0 X 20	1	TA30S05-0203GC-1
		4.0 X 10	5	TA30S05-0104GC
		4.0 X 10	1	TA30S05-0104GC-1
		4.0 X 20	5	TA30S05-0204GC
		4.0 X 20	1	TA30S05-0204GC-1
		10 X 10	2	TA30S05-0110CC
		20 X 10	2	TA30S05-0120CCN
		30 X 10	2	TA30S05-0130CCN

* When using it for the first time, please purchase the cartridge holder corresponding to size of column.

Cartridge holder

		Product Number
EXP^®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included)		XPCHUHP
Cartridge holder	length: 10 mm	XPGCHP1
Cartridge holder	length: 20 mm	XPGCHP2
Semi-prep Cartridge Holder	Inner diameter: 10 mm	XPCHSPW1
	Inner diameter: 20 mm	XPGHFSP20ID
	Inner diameter: 30 mm	XPGHFSP30ID

* EXP is a registered trademark of Optimize Technologies, Inc.

Analytical Columns (Max. pressure : 100 MPa for 1.9 µm, 45 MPa for 3 µm and 5 µm)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 20	TA30SP9-02Q1PT
		2.1 X 30	TA30SP9-03Q1PT
		2.1 X 50	TA30SP9-05Q1PT
		2.1 X 75	TA30SP9-L5Q1PT
		2.1 X 100	TA30SP9-10Q1PT
		2.1 X 150	TA30SP9-15Q1PT
		3.0 X 50	TA30SP9-0503PT
		3.0 X 75	TA30SP9-L503PT
		3.0 X 100	TA30SP9-1003PT
		3.0 X 150	TA30SP9-1503PT
3	300	2.1 X 20	TA30S03-02Q1PTH
		2.1 X 33	TA30S03-H3Q1PTH
		2.1 X 50	TA30S03-05Q1PTH
		2.1 X 75	TA30S03-L5Q1PTH
		2.1 X 100	TA30S03-10Q1PTH
		2.1 X 150	TA30S03-15Q1PTH
		3.0 X 50	TA30S03-0503PTH
		3.0 X 75	TA30S03-L503PTH
		3.0 X 100	TA30S03-1003PTH
		3.0 X 150	TA30S03-1503PTH
		4.6 X 33	TA30S03-H346PTH
		4.6 X 50	TA30S03-0546PTH
		4.6 X 75	TA30S03-L546PTH
		4.6 X 100	TA30S03-1046PTH
		4.6 X 150	TA30S03-1546PTH
		4.6 X 250	TA30S03-2546PTH
5	300	2.1 X 20	TA30S05-02Q1PTH
		2.1 X 33	TA30S05-H3Q1PTH
		2.1 X 50	TA30S05-05Q1PTH
		2.1 X 75	TA30S05-L5Q1PTH
		2.1 X 100	TA30S05-10Q1PTH
		2.1 X 150	TA30S05-15Q1PTH
		3.0 X 50	TA30S05-0503PTH
		3.0 X 75	TA30S05-L503PTH
		3.0 X 100	TA30S05-1003PTH
		3.0 X 150	TA30S05-1503PTH
		4.0 X 150	TA30S05-1504PTH
		4.0 X 250	TA30S05-2504PTH
		4.6 X 33	TA30S05-H346PTH
		4.6 X 50	TA30S05-0546PTH
		4.6 X 75	TA30S05-L546PTH
		4.6 X 100	TA30S05-1046PTH
		4.6 X 150	TA30S05-1546PTH
		4.6 X 250	TA30S05-2546PTH

Semi-preparative Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	10 X 150	TA30S05-1510WT
5	300	10 X 250	TA30S05-2510WT

High Throughput Extended Life Semi-prep Columns (YMC-Actus Triart Bio C18)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	20 X 50	TA30S05-0520WX
		20 X 100	TA30S05-1020WX
		20 X 150	TA30S05-1520WX
		20 X 250	TA30S05-2520WX
		30 X 50	TA30S05-0530WX
		30 X 75	TA30S05-L530WX
		30 X 100	TA30S05-1030WX
		30 X 150	TA30S05-1530WX
		30 X 250	TA30S05-2530WX

EXP® Guard Cartridge Columns (Max. pressure: 100 MPa, 3/pack)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 5	TA30SP9-E5Q1CC
1.9	300	3.0 X 5	TA30SP9-E503CC

* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.

Guard Cartridge Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	/pack	Product Number
3	300	2.1 X 10	5	TA30S03-01Q1GC
		2.1 X 10	1	TA30S03-01Q1GC-1
		2.1 X 20	5	TA30S03-02Q1GC
		2.1 X 20	1	TA30S03-02Q1GC-1
		3.0 X 10	5	TA30S03-0103GC
		3.0 X 10	1	TA30S03-0103GC-1
		3.0 X 20	5	TA30S03-0203GC
		3.0 X 20	1	TA30S03-0203GC-1
		4.0 X 10	5	TA30S03-0104GC
		4.0 X 10	1	TA30S03-0104GC-1
		4.0 X 20	5	TA30S03-0204GC
		4.0 X 20	1	TA30S03-0204GC-1
5	300	2.1 X 10	5	TA30S05-01Q1GC
		2.1 X 10	1	TA30S05-01Q1GC-1
		2.1 X 20	5	TA30S05-02Q1GC
		2.1 X 20	1	TA30S05-02Q1GC-1
		3.0 X 10	5	TA30S05-0103GC
		3.0 X 10	1	TA30S05-0103GC-1
		3.0 X 20	5	TA30S05-0203GC
		3.0 X 20	1	TA30S05-0203GC-1
		4.0 X 10	5	TA30S05-0104GC
		4.0 X 10	1	TA30S05-0104GC-1
		4.0 X 20	5	TA30S05-0204GC
		4.0 X 20	1	TA30S05-0204GC-1
		10 X 10	2	TA30S05-0110CC
		20 X 10	2	TA30S05-0120CCN
		30 X 10	2	TA30S05-0130CCN

* When using it for the first time, please purchase the cartridge holder corresponding to size of column.

Cartridge holder

		Product Number
EXP^®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included)		XPCHUHP
Cartridge holder	length: 10 mm	XPGCHP1
Cartridge holder	length: 20 mm	XPGCHP2
Semi-prep Cartridge Holder	Inner diameter: 10 mm	XPCHSPW1
	Inner diameter: 20 mm	XPGHFSP20ID
	Inner diameter: 30 mm	XPGHFSP30ID

* EXP is a registered trademark of Optimize Technologies, Inc.

Specification:

Base

Organic/inorganic hybrid silica

Base

Organic/inorganic hybrid silica

Stationary phase

USP L1, C18

Stationary phase

USP L1, C18

Particle size

1.9 μm, 3 μm, 5 μm

Particle size

1.9 μm, 3 μm, 5 μm

Pore size

300 Å

Pore size

300 Å

Usable pH range

1 ~12

Usable pH range

1 ~12

Endcapping

Yes

Endcapping

Yes

Specification:

Base

Organic/inorganic hybrid silica

Base

Organic/inorganic hybrid silica

Stationary phase

USP L1, C18

Stationary phase

USP L1, C18

Particle size

1.9 μm, 3 μm, 5 μm

Particle size

1.9 μm, 3 μm, 5 μm

Pore size

300 Å

Pore size

300 Å

Usable pH range

1 ~12

Usable pH range

1 ~12

Endcapping

Yes

Endcapping

Yes

Specification:

Base

Organic/inorganic hybrid silica

Base

Organic/inorganic hybrid silica

Stationary phase

USP L1, C18

Stationary phase

USP L1, C18

Particle size

1.9 μm, 3 μm, 5 μm

Particle size

1.9 μm, 3 μm, 5 μm

Pore size

300 Å

Pore size

300 Å

Usable pH range

1 ~12

Usable pH range

1 ~12

Endcapping

Yes

Endcapping

Yes

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

Column	150 X 3.0 mmI.D.
Eluent	A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 10-95%B (0-15 min)
Flow rate	0.425 mL/min
Temperature	40ºC
Detection	UV at 220 nm
Injection	4 µL (0.1-0.5 mg/mL)
Sample	γ-Endorphin (MW 1,859), Insulin (MW 5,733), Lysozyme (MW 14,000), β-Lactoglobulin (MW 18,363), α-Chymotrypsinogen A (MW 25,656), BSA (MW 66,000), Conalbumin (MW 76,000)

Good peak shape with mobile phase suitable for LC/MS

Good peak shape can be achieved with mobile phase containing formic acid so Triart Bio C18 is suitable for LC-MS analysis.

Column	150 X 3.0 mmI.D., 150 X 4.6 mmI.D.
Eluent	A) water/formic acid (100/0.1) B) acetonitrile/formic acid (100/0.08) 45-65%B (0-15 min)
Flow rate	0.425 mL/min for 3.0 mmI.D. 1.0 mL/min for 4.6 mmI.D.
Temperature	40ºC
Detection	UV at 220 nm
Sample	Human growth hormone (0.1 mg/mL)

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

Column	150 X 3.0 mmI.D.
Eluent	A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 10-95%B (0-15 min)
Flow rate	0.425 mL/min
Temperature	40ºC
Detection	UV at 220 nm
Injection	4 µL (0.1-0.5 mg/mL)
Sample	γ-Endorphin (MW 1,859), Insulin (MW 5,733), Lysozyme (MW 14,000), β-Lactoglobulin (MW 18,363), α-Chymotrypsinogen A (MW 25,656), BSA (MW 66,000), Conalbumin (MW 76,000)

Good peak shape with mobile phase suitable for LC/MS

Good peak shape can be achieved with mobile phase containing formic acid so Triart Bio C18 is suitable for LC-MS analysis.

Column	150 X 3.0 mmI.D., 150 X 4.6 mmI.D.
Eluent	A) water/formic acid (100/0.1) B) acetonitrile/formic acid (100/0.08) 45-65%B (0-15 min)
Flow rate	0.425 mL/min for 3.0 mmI.D. 1.0 mL/min for 4.6 mmI.D.
Temperature	40ºC
Detection	UV at 220 nm
Sample	Human growth hormone (0.1 mg/mL)

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

Column	150 X 3.0 mmI.D.
Eluent	A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 10-95%B (0-15 min)
Flow rate	0.425 mL/min
Temperature	40ºC
Detection	UV at 220 nm
Injection	4 µL (0.1-0.5 mg/mL)
Sample	γ-Endorphin (MW 1,859), Insulin (MW 5,733), Lysozyme (MW 14,000), β-Lactoglobulin (MW 18,363), α-Chymotrypsinogen A (MW 25,656), BSA (MW 66,000), Conalbumin (MW 76,000)

Good peak shape with mobile phase suitable for LC/MS

Good peak shape can be achieved with mobile phase containing formic acid so Triart Bio C18 is suitable for LC-MS analysis.

Column	150 X 3.0 mmI.D., 150 X 4.6 mmI.D.
Eluent	A) water/formic acid (100/0.1) B) acetonitrile/formic acid (100/0.08) 45-65%B (0-15 min)
Flow rate	0.425 mL/min for 3.0 mmI.D. 1.0 mL/min for 4.6 mmI.D.
Temperature	40ºC
Detection	UV at 220 nm
Sample	Human growth hormone (0.1 mg/mL)

Analytical Columns (Max. pressure : 100 MPa for 1.9 µm, 45 MPa for 3 µm and 5 µm)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 20	TA30SP9-02Q1PT
		2.1 X 30	TA30SP9-03Q1PT
		2.1 X 50	TA30SP9-05Q1PT
		2.1 X 75	TA30SP9-L5Q1PT
		2.1 X 100	TA30SP9-10Q1PT
		2.1 X 150	TA30SP9-15Q1PT
		3.0 X 50	TA30SP9-0503PT
		3.0 X 75	TA30SP9-L503PT
		3.0 X 100	TA30SP9-1003PT
		3.0 X 150	TA30SP9-1503PT
3	300	2.1 X 20	TA30S03-02Q1PTH
		2.1 X 33	TA30S03-H3Q1PTH
		2.1 X 50	TA30S03-05Q1PTH
		2.1 X 75	TA30S03-L5Q1PTH
		2.1 X 100	TA30S03-10Q1PTH
		2.1 X 150	TA30S03-15Q1PTH
		3.0 X 50	TA30S03-0503PTH
		3.0 X 75	TA30S03-L503PTH
		3.0 X 100	TA30S03-1003PTH
		3.0 X 150	TA30S03-1503PTH
		4.6 X 33	TA30S03-H346PTH
		4.6 X 50	TA30S03-0546PTH
		4.6 X 75	TA30S03-L546PTH
		4.6 X 100	TA30S03-1046PTH
		4.6 X 150	TA30S03-1546PTH
		4.6 X 250	TA30S03-2546PTH
5	300	2.1 X 20	TA30S05-02Q1PTH
		2.1 X 33	TA30S05-H3Q1PTH
		2.1 X 50	TA30S05-05Q1PTH
		2.1 X 75	TA30S05-L5Q1PTH
		2.1 X 100	TA30S05-10Q1PTH
		2.1 X 150	TA30S05-15Q1PTH
		3.0 X 50	TA30S05-0503PTH
		3.0 X 75	TA30S05-L503PTH
		3.0 X 100	TA30S05-1003PTH
		3.0 X 150	TA30S05-1503PTH
		4.0 X 150	TA30S05-1504PTH
		4.0 X 250	TA30S05-2504PTH
		4.6 X 33	TA30S05-H346PTH
		4.6 X 50	TA30S05-0546PTH
		4.6 X 75	TA30S05-L546PTH
		4.6 X 100	TA30S05-1046PTH
		4.6 X 150	TA30S05-1546PTH
		4.6 X 250	TA30S05-2546PTH

Semi-preparative Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	10 X 150	TA30S05-1510WT
5	300	10 X 250	TA30S05-2510WT

High Throughput Extended Life Semi-prep Columns (YMC-Actus Triart Bio C18)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	20 X 50	TA30S05-0520WX
		20 X 100	TA30S05-1020WX
		20 X 150	TA30S05-1520WX
		20 X 250	TA30S05-2520WX
		30 X 50	TA30S05-0530WX
		30 X 75	TA30S05-L530WX
		30 X 100	TA30S05-1030WX
		30 X 150	TA30S05-1530WX
		30 X 250	TA30S05-2530WX

EXP® Guard Cartridge Columns (Max. pressure: 100 MPa, 3/pack)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 5	TA30SP9-E5Q1CC
1.9	300	3.0 X 5	TA30SP9-E503CC

* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.

Guard Cartridge Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	/pack	Product Number
3	300	2.1 X 10	5	TA30S03-01Q1GC
		2.1 X 10	1	TA30S03-01Q1GC-1
		2.1 X 20	5	TA30S03-02Q1GC
		2.1 X 20	1	TA30S03-02Q1GC-1
		3.0 X 10	5	TA30S03-0103GC
		3.0 X 10	1	TA30S03-0103GC-1
		3.0 X 20	5	TA30S03-0203GC
		3.0 X 20	1	TA30S03-0203GC-1
		4.0 X 10	5	TA30S03-0104GC
		4.0 X 10	1	TA30S03-0104GC-1
		4.0 X 20	5	TA30S03-0204GC
		4.0 X 20	1	TA30S03-0204GC-1
5	300	2.1 X 10	5	TA30S05-01Q1GC
		2.1 X 10	1	TA30S05-01Q1GC-1
		2.1 X 20	5	TA30S05-02Q1GC
		2.1 X 20	1	TA30S05-02Q1GC-1
		3.0 X 10	5	TA30S05-0103GC
		3.0 X 10	1	TA30S05-0103GC-1
		3.0 X 20	5	TA30S05-0203GC
		3.0 X 20	1	TA30S05-0203GC-1
		4.0 X 10	5	TA30S05-0104GC
		4.0 X 10	1	TA30S05-0104GC-1
		4.0 X 20	5	TA30S05-0204GC
		4.0 X 20	1	TA30S05-0204GC-1
		10 X 10	2	TA30S05-0110CC
		20 X 10	2	TA30S05-0120CCN
		30 X 10	2	TA30S05-0130CCN

* When using it for the first time, please purchase the cartridge holder corresponding to size of column.

Cartridge holder

		Product Number
EXP^®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included)		XPCHUHP
Cartridge holder	length: 10 mm	XPGCHP1
Cartridge holder	length: 20 mm	XPGCHP2
Semi-prep Cartridge Holder	Inner diameter: 10 mm	XPCHSPW1
	Inner diameter: 20 mm	XPGHFSP20ID
	Inner diameter: 30 mm	XPGHFSP30ID

* EXP is a registered trademark of Optimize Technologies, Inc.

Analytical Columns (Max. pressure : 100 MPa for 1.9 µm, 45 MPa for 3 µm and 5 µm)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 20	TA30SP9-02Q1PT
		2.1 X 30	TA30SP9-03Q1PT
		2.1 X 50	TA30SP9-05Q1PT
		2.1 X 75	TA30SP9-L5Q1PT
		2.1 X 100	TA30SP9-10Q1PT
		2.1 X 150	TA30SP9-15Q1PT
		3.0 X 50	TA30SP9-0503PT
		3.0 X 75	TA30SP9-L503PT
		3.0 X 100	TA30SP9-1003PT
		3.0 X 150	TA30SP9-1503PT
3	300	2.1 X 20	TA30S03-02Q1PTH
		2.1 X 33	TA30S03-H3Q1PTH
		2.1 X 50	TA30S03-05Q1PTH
		2.1 X 75	TA30S03-L5Q1PTH
		2.1 X 100	TA30S03-10Q1PTH
		2.1 X 150	TA30S03-15Q1PTH
		3.0 X 50	TA30S03-0503PTH
		3.0 X 75	TA30S03-L503PTH
		3.0 X 100	TA30S03-1003PTH
		3.0 X 150	TA30S03-1503PTH
		4.6 X 33	TA30S03-H346PTH
		4.6 X 50	TA30S03-0546PTH
		4.6 X 75	TA30S03-L546PTH
		4.6 X 100	TA30S03-1046PTH
		4.6 X 150	TA30S03-1546PTH
		4.6 X 250	TA30S03-2546PTH
5	300	2.1 X 20	TA30S05-02Q1PTH
		2.1 X 33	TA30S05-H3Q1PTH
		2.1 X 50	TA30S05-05Q1PTH
		2.1 X 75	TA30S05-L5Q1PTH
		2.1 X 100	TA30S05-10Q1PTH
		2.1 X 150	TA30S05-15Q1PTH
		3.0 X 50	TA30S05-0503PTH
		3.0 X 75	TA30S05-L503PTH
		3.0 X 100	TA30S05-1003PTH
		3.0 X 150	TA30S05-1503PTH
		4.0 X 150	TA30S05-1504PTH
		4.0 X 250	TA30S05-2504PTH
		4.6 X 33	TA30S05-H346PTH
		4.6 X 50	TA30S05-0546PTH
		4.6 X 75	TA30S05-L546PTH
		4.6 X 100	TA30S05-1046PTH
		4.6 X 150	TA30S05-1546PTH
		4.6 X 250	TA30S05-2546PTH

Semi-preparative Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	10 X 150	TA30S05-1510WT
5	300	10 X 250	TA30S05-2510WT

High Throughput Extended Life Semi-prep Columns (YMC-Actus Triart Bio C18)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	20 X 50	TA30S05-0520WX
		20 X 100	TA30S05-1020WX
		20 X 150	TA30S05-1520WX
		20 X 250	TA30S05-2520WX
		30 X 50	TA30S05-0530WX
		30 X 75	TA30S05-L530WX
		30 X 100	TA30S05-1030WX
		30 X 150	TA30S05-1530WX
		30 X 250	TA30S05-2530WX

EXP® Guard Cartridge Columns (Max. pressure: 100 MPa, 3/pack)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 5	TA30SP9-E5Q1CC
1.9	300	3.0 X 5	TA30SP9-E503CC

* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.

Guard Cartridge Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	/pack	Product Number
3	300	2.1 X 10	5	TA30S03-01Q1GC
		2.1 X 10	1	TA30S03-01Q1GC-1
		2.1 X 20	5	TA30S03-02Q1GC
		2.1 X 20	1	TA30S03-02Q1GC-1
		3.0 X 10	5	TA30S03-0103GC
		3.0 X 10	1	TA30S03-0103GC-1
		3.0 X 20	5	TA30S03-0203GC
		3.0 X 20	1	TA30S03-0203GC-1
		4.0 X 10	5	TA30S03-0104GC
		4.0 X 10	1	TA30S03-0104GC-1
		4.0 X 20	5	TA30S03-0204GC
		4.0 X 20	1	TA30S03-0204GC-1
5	300	2.1 X 10	5	TA30S05-01Q1GC
		2.1 X 10	1	TA30S05-01Q1GC-1
		2.1 X 20	5	TA30S05-02Q1GC
		2.1 X 20	1	TA30S05-02Q1GC-1
		3.0 X 10	5	TA30S05-0103GC
		3.0 X 10	1	TA30S05-0103GC-1
		3.0 X 20	5	TA30S05-0203GC
		3.0 X 20	1	TA30S05-0203GC-1
		4.0 X 10	5	TA30S05-0104GC
		4.0 X 10	1	TA30S05-0104GC-1
		4.0 X 20	5	TA30S05-0204GC
		4.0 X 20	1	TA30S05-0204GC-1
		10 X 10	2	TA30S05-0110CC
		20 X 10	2	TA30S05-0120CCN
		30 X 10	2	TA30S05-0130CCN

* When using it for the first time, please purchase the cartridge holder corresponding to size of column.

Cartridge holder

		Product Number
EXP^®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included)		XPCHUHP
Cartridge holder	length: 10 mm	XPGCHP1
Cartridge holder	length: 20 mm	XPGCHP2
Semi-prep Cartridge Holder	Inner diameter: 10 mm	XPCHSPW1
	Inner diameter: 20 mm	XPGHFSP20ID
	Inner diameter: 30 mm	XPGHFSP30ID

* EXP is a registered trademark of Optimize Technologies, Inc.

Analytical Columns (Max. pressure : 100 MPa for 1.9 µm, 45 MPa for 3 µm and 5 µm)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 20	TA30SP9-02Q1PT
		2.1 X 30	TA30SP9-03Q1PT
		2.1 X 50	TA30SP9-05Q1PT
		2.1 X 75	TA30SP9-L5Q1PT
		2.1 X 100	TA30SP9-10Q1PT
		2.1 X 150	TA30SP9-15Q1PT
		3.0 X 50	TA30SP9-0503PT
		3.0 X 75	TA30SP9-L503PT
		3.0 X 100	TA30SP9-1003PT
		3.0 X 150	TA30SP9-1503PT
3	300	2.1 X 20	TA30S03-02Q1PTH
		2.1 X 33	TA30S03-H3Q1PTH
		2.1 X 50	TA30S03-05Q1PTH
		2.1 X 75	TA30S03-L5Q1PTH
		2.1 X 100	TA30S03-10Q1PTH
		2.1 X 150	TA30S03-15Q1PTH
		3.0 X 50	TA30S03-0503PTH
		3.0 X 75	TA30S03-L503PTH
		3.0 X 100	TA30S03-1003PTH
		3.0 X 150	TA30S03-1503PTH
		4.6 X 33	TA30S03-H346PTH
		4.6 X 50	TA30S03-0546PTH
		4.6 X 75	TA30S03-L546PTH
		4.6 X 100	TA30S03-1046PTH
		4.6 X 150	TA30S03-1546PTH
		4.6 X 250	TA30S03-2546PTH
5	300	2.1 X 20	TA30S05-02Q1PTH
		2.1 X 33	TA30S05-H3Q1PTH
		2.1 X 50	TA30S05-05Q1PTH
		2.1 X 75	TA30S05-L5Q1PTH
		2.1 X 100	TA30S05-10Q1PTH
		2.1 X 150	TA30S05-15Q1PTH
		3.0 X 50	TA30S05-0503PTH
		3.0 X 75	TA30S05-L503PTH
		3.0 X 100	TA30S05-1003PTH
		3.0 X 150	TA30S05-1503PTH
		4.0 X 150	TA30S05-1504PTH
		4.0 X 250	TA30S05-2504PTH
		4.6 X 33	TA30S05-H346PTH
		4.6 X 50	TA30S05-0546PTH
		4.6 X 75	TA30S05-L546PTH
		4.6 X 100	TA30S05-1046PTH
		4.6 X 150	TA30S05-1546PTH
		4.6 X 250	TA30S05-2546PTH

Semi-preparative Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	10 X 150	TA30S05-1510WT
5	300	10 X 250	TA30S05-2510WT

High Throughput Extended Life Semi-prep Columns (YMC-Actus Triart Bio C18)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	20 X 50	TA30S05-0520WX
		20 X 100	TA30S05-1020WX
		20 X 150	TA30S05-1520WX
		20 X 250	TA30S05-2520WX
		30 X 50	TA30S05-0530WX
		30 X 75	TA30S05-L530WX
		30 X 100	TA30S05-1030WX
		30 X 150	TA30S05-1530WX
		30 X 250	TA30S05-2530WX

EXP® Guard Cartridge Columns (Max. pressure: 100 MPa, 3/pack)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 5	TA30SP9-E5Q1CC
1.9	300	3.0 X 5	TA30SP9-E503CC

* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.

Guard Cartridge Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	/pack	Product Number
3	300	2.1 X 10	5	TA30S03-01Q1GC
		2.1 X 10	1	TA30S03-01Q1GC-1
		2.1 X 20	5	TA30S03-02Q1GC
		2.1 X 20	1	TA30S03-02Q1GC-1
		3.0 X 10	5	TA30S03-0103GC
		3.0 X 10	1	TA30S03-0103GC-1
		3.0 X 20	5	TA30S03-0203GC
		3.0 X 20	1	TA30S03-0203GC-1
		4.0 X 10	5	TA30S03-0104GC
		4.0 X 10	1	TA30S03-0104GC-1
		4.0 X 20	5	TA30S03-0204GC
		4.0 X 20	1	TA30S03-0204GC-1
5	300	2.1 X 10	5	TA30S05-01Q1GC
		2.1 X 10	1	TA30S05-01Q1GC-1
		2.1 X 20	5	TA30S05-02Q1GC
		2.1 X 20	1	TA30S05-02Q1GC-1
		3.0 X 10	5	TA30S05-0103GC
		3.0 X 10	1	TA30S05-0103GC-1
		3.0 X 20	5	TA30S05-0203GC
		3.0 X 20	1	TA30S05-0203GC-1
		4.0 X 10	5	TA30S05-0104GC
		4.0 X 10	1	TA30S05-0104GC-1
		4.0 X 20	5	TA30S05-0204GC
		4.0 X 20	1	TA30S05-0204GC-1
		10 X 10	2	TA30S05-0110CC
		20 X 10	2	TA30S05-0120CCN
		30 X 10	2	TA30S05-0130CCN

* When using it for the first time, please purchase the cartridge holder corresponding to size of column.

Cartridge holder

		Product Number
EXP^®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included)		XPCHUHP
Cartridge holder	length: 10 mm	XPGCHP1
Cartridge holder	length: 20 mm	XPGCHP2
Semi-prep Cartridge Holder	Inner diameter: 10 mm	XPCHSPW1
	Inner diameter: 20 mm	XPGHFSP20ID
	Inner diameter: 30 mm	XPGHFSP30ID

* EXP is a registered trademark of Optimize Technologies, Inc.

Analytical Columns (Max. pressure : 100 MPa for 1.9 µm, 45 MPa for 3 µm and 5 µm)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 20	TA30SP9-02Q1PT
		2.1 X 30	TA30SP9-03Q1PT
		2.1 X 50	TA30SP9-05Q1PT
		2.1 X 75	TA30SP9-L5Q1PT
		2.1 X 100	TA30SP9-10Q1PT
		2.1 X 150	TA30SP9-15Q1PT
		3.0 X 50	TA30SP9-0503PT
		3.0 X 75	TA30SP9-L503PT
		3.0 X 100	TA30SP9-1003PT
		3.0 X 150	TA30SP9-1503PT
3	300	2.1 X 20	TA30S03-02Q1PTH
		2.1 X 33	TA30S03-H3Q1PTH
		2.1 X 50	TA30S03-05Q1PTH
		2.1 X 75	TA30S03-L5Q1PTH
		2.1 X 100	TA30S03-10Q1PTH
		2.1 X 150	TA30S03-15Q1PTH
		3.0 X 50	TA30S03-0503PTH
		3.0 X 75	TA30S03-L503PTH
		3.0 X 100	TA30S03-1003PTH
		3.0 X 150	TA30S03-1503PTH
		4.6 X 33	TA30S03-H346PTH
		4.6 X 50	TA30S03-0546PTH
		4.6 X 75	TA30S03-L546PTH
		4.6 X 100	TA30S03-1046PTH
		4.6 X 150	TA30S03-1546PTH
		4.6 X 250	TA30S03-2546PTH
5	300	2.1 X 20	TA30S05-02Q1PTH
		2.1 X 33	TA30S05-H3Q1PTH
		2.1 X 50	TA30S05-05Q1PTH
		2.1 X 75	TA30S05-L5Q1PTH
		2.1 X 100	TA30S05-10Q1PTH
		2.1 X 150	TA30S05-15Q1PTH
		3.0 X 50	TA30S05-0503PTH
		3.0 X 75	TA30S05-L503PTH
		3.0 X 100	TA30S05-1003PTH
		3.0 X 150	TA30S05-1503PTH
		4.0 X 150	TA30S05-1504PTH
		4.0 X 250	TA30S05-2504PTH
		4.6 X 33	TA30S05-H346PTH
		4.6 X 50	TA30S05-0546PTH
		4.6 X 75	TA30S05-L546PTH
		4.6 X 100	TA30S05-1046PTH
		4.6 X 150	TA30S05-1546PTH
		4.6 X 250	TA30S05-2546PTH

Semi-preparative Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	10 X 150	TA30S05-1510WT
5	300	10 X 250	TA30S05-2510WT

High Throughput Extended Life Semi-prep Columns (YMC-Actus Triart Bio C18)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	20 X 50	TA30S05-0520WX
		20 X 100	TA30S05-1020WX
		20 X 150	TA30S05-1520WX
		20 X 250	TA30S05-2520WX
		30 X 50	TA30S05-0530WX
		30 X 75	TA30S05-L530WX
		30 X 100	TA30S05-1030WX
		30 X 150	TA30S05-1530WX
		30 X 250	TA30S05-2530WX

EXP® Guard Cartridge Columns (Max. pressure: 100 MPa, 3/pack)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 5	TA30SP9-E5Q1CC
1.9	300	3.0 X 5	TA30SP9-E503CC

* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.

Guard Cartridge Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	/pack	Product Number
3	300	2.1 X 10	5	TA30S03-01Q1GC
		2.1 X 10	1	TA30S03-01Q1GC-1
		2.1 X 20	5	TA30S03-02Q1GC
		2.1 X 20	1	TA30S03-02Q1GC-1
		3.0 X 10	5	TA30S03-0103GC
		3.0 X 10	1	TA30S03-0103GC-1
		3.0 X 20	5	TA30S03-0203GC
		3.0 X 20	1	TA30S03-0203GC-1
		4.0 X 10	5	TA30S03-0104GC
		4.0 X 10	1	TA30S03-0104GC-1
		4.0 X 20	5	TA30S03-0204GC
		4.0 X 20	1	TA30S03-0204GC-1
5	300	2.1 X 10	5	TA30S05-01Q1GC
		2.1 X 10	1	TA30S05-01Q1GC-1
		2.1 X 20	5	TA30S05-02Q1GC
		2.1 X 20	1	TA30S05-02Q1GC-1
		3.0 X 10	5	TA30S05-0103GC
		3.0 X 10	1	TA30S05-0103GC-1
		3.0 X 20	5	TA30S05-0203GC
		3.0 X 20	1	TA30S05-0203GC-1
		4.0 X 10	5	TA30S05-0104GC
		4.0 X 10	1	TA30S05-0104GC-1
		4.0 X 20	5	TA30S05-0204GC
		4.0 X 20	1	TA30S05-0204GC-1
		10 X 10	2	TA30S05-0110CC
		20 X 10	2	TA30S05-0120CCN
		30 X 10	2	TA30S05-0130CCN

* When using it for the first time, please purchase the cartridge holder corresponding to size of column.

Cartridge holder

		Product Number
EXP^®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included)		XPCHUHP
Cartridge holder	length: 10 mm	XPGCHP1
Cartridge holder	length: 20 mm	XPGCHP2
Semi-prep Cartridge Holder	Inner diameter: 10 mm	XPCHSPW1
	Inner diameter: 20 mm	XPGHFSP20ID
	Inner diameter: 30 mm	XPGHFSP30ID

* EXP is a registered trademark of Optimize Technologies, Inc.

Specification:

Base

Organic/inorganic hybrid silica

Base

Organic/inorganic hybrid silica

Stationary phase

USP L1, C18

Stationary phase

USP L1, C18

Particle size

1.9 μm, 3 μm, 5 μm

Particle size

1.9 μm, 3 μm, 5 μm

Pore size

300 Å

Pore size

300 Å

Usable pH range

1 ~12

Usable pH range

1 ~12

Endcapping

Yes

Endcapping

Yes

Specification:

Base

Organic/inorganic hybrid silica

Base

Organic/inorganic hybrid silica

Stationary phase

USP L1, C18

Stationary phase

USP L1, C18

Particle size

1.9 μm, 3 μm, 5 μm

Particle size

1.9 μm, 3 μm, 5 μm

Pore size

300 Å

Pore size

300 Å

Usable pH range

1 ~12

Usable pH range

1 ~12

Endcapping

Yes

Endcapping

Yes

Specification:

Base

Organic/inorganic hybrid silica

Base

Organic/inorganic hybrid silica

Stationary phase

USP L1, C18

Stationary phase

USP L1, C18

Particle size

1.9 μm, 3 μm, 5 μm

Particle size

1.9 μm, 3 μm, 5 μm

Pore size

300 Å

Pore size

300 Å

Usable pH range

1 ~12

Usable pH range

1 ~12

Endcapping

Yes

Endcapping

Yes

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

Column	150 X 3.0 mmI.D.
Eluent	A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 10-95%B (0-15 min)
Flow rate	0.425 mL/min
Temperature	40ºC
Detection	UV at 220 nm
Injection	4 µL (0.1-0.5 mg/mL)
Sample	γ-Endorphin (MW 1,859), Insulin (MW 5,733), Lysozyme (MW 14,000), β-Lactoglobulin (MW 18,363), α-Chymotrypsinogen A (MW 25,656), BSA (MW 66,000), Conalbumin (MW 76,000)

Good peak shape with mobile phase suitable for LC/MS

Good peak shape can be achieved with mobile phase containing formic acid so Triart Bio C18 is suitable for LC-MS analysis.

Column	150 X 3.0 mmI.D., 150 X 4.6 mmI.D.
Eluent	A) water/formic acid (100/0.1) B) acetonitrile/formic acid (100/0.08) 45-65%B (0-15 min)
Flow rate	0.425 mL/min for 3.0 mmI.D. 1.0 mL/min for 4.6 mmI.D.
Temperature	40ºC
Detection	UV at 220 nm
Sample	Human growth hormone (0.1 mg/mL)

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

Column	150 X 3.0 mmI.D.
Eluent	A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 10-95%B (0-15 min)
Flow rate	0.425 mL/min
Temperature	40ºC
Detection	UV at 220 nm
Injection	4 µL (0.1-0.5 mg/mL)
Sample	γ-Endorphin (MW 1,859), Insulin (MW 5,733), Lysozyme (MW 14,000), β-Lactoglobulin (MW 18,363), α-Chymotrypsinogen A (MW 25,656), BSA (MW 66,000), Conalbumin (MW 76,000)

Good peak shape with mobile phase suitable for LC/MS

Good peak shape can be achieved with mobile phase containing formic acid so Triart Bio C18 is suitable for LC-MS analysis.

Column	150 X 3.0 mmI.D., 150 X 4.6 mmI.D.
Eluent	A) water/formic acid (100/0.1) B) acetonitrile/formic acid (100/0.08) 45-65%B (0-15 min)
Flow rate	0.425 mL/min for 3.0 mmI.D. 1.0 mL/min for 4.6 mmI.D.
Temperature	40ºC
Detection	UV at 220 nm
Sample	Human growth hormone (0.1 mg/mL)

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

Column	150 X 3.0 mmI.D.
Eluent	A) water/TFA (100/0.1) B) acetonitrile/TFA (100/0.1) 10-95%B (0-15 min)
Flow rate	0.425 mL/min
Temperature	40ºC
Detection	UV at 220 nm
Injection	4 µL (0.1-0.5 mg/mL)
Sample	γ-Endorphin (MW 1,859), Insulin (MW 5,733), Lysozyme (MW 14,000), β-Lactoglobulin (MW 18,363), α-Chymotrypsinogen A (MW 25,656), BSA (MW 66,000), Conalbumin (MW 76,000)

Good peak shape with mobile phase suitable for LC/MS

Good peak shape can be achieved with mobile phase containing formic acid so Triart Bio C18 is suitable for LC-MS analysis.

Column	150 X 3.0 mmI.D., 150 X 4.6 mmI.D.
Eluent	A) water/formic acid (100/0.1) B) acetonitrile/formic acid (100/0.08) 45-65%B (0-15 min)
Flow rate	0.425 mL/min for 3.0 mmI.D. 1.0 mL/min for 4.6 mmI.D.
Temperature	40ºC
Detection	UV at 220 nm
Sample	Human growth hormone (0.1 mg/mL)

Analytical Columns (Max. pressure : 100 MPa for 1.9 µm, 45 MPa for 3 µm and 5 µm)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 20	TA30SP9-02Q1PT
		2.1 X 30	TA30SP9-03Q1PT
		2.1 X 50	TA30SP9-05Q1PT
		2.1 X 75	TA30SP9-L5Q1PT
		2.1 X 100	TA30SP9-10Q1PT
		2.1 X 150	TA30SP9-15Q1PT
		3.0 X 50	TA30SP9-0503PT
		3.0 X 75	TA30SP9-L503PT
		3.0 X 100	TA30SP9-1003PT
		3.0 X 150	TA30SP9-1503PT
3	300	2.1 X 20	TA30S03-02Q1PTH
		2.1 X 33	TA30S03-H3Q1PTH
		2.1 X 50	TA30S03-05Q1PTH
		2.1 X 75	TA30S03-L5Q1PTH
		2.1 X 100	TA30S03-10Q1PTH
		2.1 X 150	TA30S03-15Q1PTH
		3.0 X 50	TA30S03-0503PTH
		3.0 X 75	TA30S03-L503PTH
		3.0 X 100	TA30S03-1003PTH
		3.0 X 150	TA30S03-1503PTH
		4.6 X 33	TA30S03-H346PTH
		4.6 X 50	TA30S03-0546PTH
		4.6 X 75	TA30S03-L546PTH
		4.6 X 100	TA30S03-1046PTH
		4.6 X 150	TA30S03-1546PTH
		4.6 X 250	TA30S03-2546PTH
5	300	2.1 X 20	TA30S05-02Q1PTH
		2.1 X 33	TA30S05-H3Q1PTH
		2.1 X 50	TA30S05-05Q1PTH
		2.1 X 75	TA30S05-L5Q1PTH
		2.1 X 100	TA30S05-10Q1PTH
		2.1 X 150	TA30S05-15Q1PTH
		3.0 X 50	TA30S05-0503PTH
		3.0 X 75	TA30S05-L503PTH
		3.0 X 100	TA30S05-1003PTH
		3.0 X 150	TA30S05-1503PTH
		4.0 X 150	TA30S05-1504PTH
		4.0 X 250	TA30S05-2504PTH
		4.6 X 33	TA30S05-H346PTH
		4.6 X 50	TA30S05-0546PTH
		4.6 X 75	TA30S05-L546PTH
		4.6 X 100	TA30S05-1046PTH
		4.6 X 150	TA30S05-1546PTH
		4.6 X 250	TA30S05-2546PTH

Semi-preparative Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	10 X 150	TA30S05-1510WT
5	300	10 X 250	TA30S05-2510WT

High Throughput Extended Life Semi-prep Columns (YMC-Actus Triart Bio C18)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	20 X 50	TA30S05-0520WX
		20 X 100	TA30S05-1020WX
		20 X 150	TA30S05-1520WX
		20 X 250	TA30S05-2520WX
		30 X 50	TA30S05-0530WX
		30 X 75	TA30S05-L530WX
		30 X 100	TA30S05-1030WX
		30 X 150	TA30S05-1530WX
		30 X 250	TA30S05-2530WX

EXP® Guard Cartridge Columns (Max. pressure: 100 MPa, 3/pack)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 5	TA30SP9-E5Q1CC
1.9	300	3.0 X 5	TA30SP9-E503CC

* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.

Guard Cartridge Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	/pack	Product Number
3	300	2.1 X 10	5	TA30S03-01Q1GC
		2.1 X 10	1	TA30S03-01Q1GC-1
		2.1 X 20	5	TA30S03-02Q1GC
		2.1 X 20	1	TA30S03-02Q1GC-1
		3.0 X 10	5	TA30S03-0103GC
		3.0 X 10	1	TA30S03-0103GC-1
		3.0 X 20	5	TA30S03-0203GC
		3.0 X 20	1	TA30S03-0203GC-1
		4.0 X 10	5	TA30S03-0104GC
		4.0 X 10	1	TA30S03-0104GC-1
		4.0 X 20	5	TA30S03-0204GC
		4.0 X 20	1	TA30S03-0204GC-1
5	300	2.1 X 10	5	TA30S05-01Q1GC
		2.1 X 10	1	TA30S05-01Q1GC-1
		2.1 X 20	5	TA30S05-02Q1GC
		2.1 X 20	1	TA30S05-02Q1GC-1
		3.0 X 10	5	TA30S05-0103GC
		3.0 X 10	1	TA30S05-0103GC-1
		3.0 X 20	5	TA30S05-0203GC
		3.0 X 20	1	TA30S05-0203GC-1
		4.0 X 10	5	TA30S05-0104GC
		4.0 X 10	1	TA30S05-0104GC-1
		4.0 X 20	5	TA30S05-0204GC
		4.0 X 20	1	TA30S05-0204GC-1
		10 X 10	2	TA30S05-0110CC
		20 X 10	2	TA30S05-0120CCN
		30 X 10	2	TA30S05-0130CCN

* When using it for the first time, please purchase the cartridge holder corresponding to size of column.

Cartridge holder

		Product Number
EXP^®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included)		XPCHUHP
Cartridge holder	length: 10 mm	XPGCHP1
Cartridge holder	length: 20 mm	XPGCHP2
Semi-prep Cartridge Holder	Inner diameter: 10 mm	XPCHSPW1
	Inner diameter: 20 mm	XPGHFSP20ID
	Inner diameter: 30 mm	XPGHFSP30ID

* EXP is a registered trademark of Optimize Technologies, Inc.

Analytical Columns (Max. pressure : 100 MPa for 1.9 µm, 45 MPa for 3 µm and 5 µm)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 20	TA30SP9-02Q1PT
		2.1 X 30	TA30SP9-03Q1PT
		2.1 X 50	TA30SP9-05Q1PT
		2.1 X 75	TA30SP9-L5Q1PT
		2.1 X 100	TA30SP9-10Q1PT
		2.1 X 150	TA30SP9-15Q1PT
		3.0 X 50	TA30SP9-0503PT
		3.0 X 75	TA30SP9-L503PT
		3.0 X 100	TA30SP9-1003PT
		3.0 X 150	TA30SP9-1503PT
3	300	2.1 X 20	TA30S03-02Q1PTH
		2.1 X 33	TA30S03-H3Q1PTH
		2.1 X 50	TA30S03-05Q1PTH
		2.1 X 75	TA30S03-L5Q1PTH
		2.1 X 100	TA30S03-10Q1PTH
		2.1 X 150	TA30S03-15Q1PTH
		3.0 X 50	TA30S03-0503PTH
		3.0 X 75	TA30S03-L503PTH
		3.0 X 100	TA30S03-1003PTH
		3.0 X 150	TA30S03-1503PTH
		4.6 X 33	TA30S03-H346PTH
		4.6 X 50	TA30S03-0546PTH
		4.6 X 75	TA30S03-L546PTH
		4.6 X 100	TA30S03-1046PTH
		4.6 X 150	TA30S03-1546PTH
		4.6 X 250	TA30S03-2546PTH
5	300	2.1 X 20	TA30S05-02Q1PTH
		2.1 X 33	TA30S05-H3Q1PTH
		2.1 X 50	TA30S05-05Q1PTH
		2.1 X 75	TA30S05-L5Q1PTH
		2.1 X 100	TA30S05-10Q1PTH
		2.1 X 150	TA30S05-15Q1PTH
		3.0 X 50	TA30S05-0503PTH
		3.0 X 75	TA30S05-L503PTH
		3.0 X 100	TA30S05-1003PTH
		3.0 X 150	TA30S05-1503PTH
		4.0 X 150	TA30S05-1504PTH
		4.0 X 250	TA30S05-2504PTH
		4.6 X 33	TA30S05-H346PTH
		4.6 X 50	TA30S05-0546PTH
		4.6 X 75	TA30S05-L546PTH
		4.6 X 100	TA30S05-1046PTH
		4.6 X 150	TA30S05-1546PTH
		4.6 X 250	TA30S05-2546PTH

Semi-preparative Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	10 X 150	TA30S05-1510WT
5	300	10 X 250	TA30S05-2510WT

High Throughput Extended Life Semi-prep Columns (YMC-Actus Triart Bio C18)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	20 X 50	TA30S05-0520WX
		20 X 100	TA30S05-1020WX
		20 X 150	TA30S05-1520WX
		20 X 250	TA30S05-2520WX
		30 X 50	TA30S05-0530WX
		30 X 75	TA30S05-L530WX
		30 X 100	TA30S05-1030WX
		30 X 150	TA30S05-1530WX
		30 X 250	TA30S05-2530WX

EXP® Guard Cartridge Columns (Max. pressure: 100 MPa, 3/pack)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 5	TA30SP9-E5Q1CC
1.9	300	3.0 X 5	TA30SP9-E503CC

* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.

Guard Cartridge Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	/pack	Product Number
3	300	2.1 X 10	5	TA30S03-01Q1GC
		2.1 X 10	1	TA30S03-01Q1GC-1
		2.1 X 20	5	TA30S03-02Q1GC
		2.1 X 20	1	TA30S03-02Q1GC-1
		3.0 X 10	5	TA30S03-0103GC
		3.0 X 10	1	TA30S03-0103GC-1
		3.0 X 20	5	TA30S03-0203GC
		3.0 X 20	1	TA30S03-0203GC-1
		4.0 X 10	5	TA30S03-0104GC
		4.0 X 10	1	TA30S03-0104GC-1
		4.0 X 20	5	TA30S03-0204GC
		4.0 X 20	1	TA30S03-0204GC-1
5	300	2.1 X 10	5	TA30S05-01Q1GC
		2.1 X 10	1	TA30S05-01Q1GC-1
		2.1 X 20	5	TA30S05-02Q1GC
		2.1 X 20	1	TA30S05-02Q1GC-1
		3.0 X 10	5	TA30S05-0103GC
		3.0 X 10	1	TA30S05-0103GC-1
		3.0 X 20	5	TA30S05-0203GC
		3.0 X 20	1	TA30S05-0203GC-1
		4.0 X 10	5	TA30S05-0104GC
		4.0 X 10	1	TA30S05-0104GC-1
		4.0 X 20	5	TA30S05-0204GC
		4.0 X 20	1	TA30S05-0204GC-1
		10 X 10	2	TA30S05-0110CC
		20 X 10	2	TA30S05-0120CCN
		30 X 10	2	TA30S05-0130CCN

* When using it for the first time, please purchase the cartridge holder corresponding to size of column.

Cartridge holder

		Product Number
EXP^®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included)		XPCHUHP
Cartridge holder	length: 10 mm	XPGCHP1
Cartridge holder	length: 20 mm	XPGCHP2
Semi-prep Cartridge Holder	Inner diameter: 10 mm	XPCHSPW1
	Inner diameter: 20 mm	XPGHFSP20ID
	Inner diameter: 30 mm	XPGHFSP30ID

* EXP is a registered trademark of Optimize Technologies, Inc.

Analytical Columns (Max. pressure : 100 MPa for 1.9 µm, 45 MPa for 3 µm and 5 µm)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 20	TA30SP9-02Q1PT
		2.1 X 30	TA30SP9-03Q1PT
		2.1 X 50	TA30SP9-05Q1PT
		2.1 X 75	TA30SP9-L5Q1PT
		2.1 X 100	TA30SP9-10Q1PT
		2.1 X 150	TA30SP9-15Q1PT
		3.0 X 50	TA30SP9-0503PT
		3.0 X 75	TA30SP9-L503PT
		3.0 X 100	TA30SP9-1003PT
		3.0 X 150	TA30SP9-1503PT
3	300	2.1 X 20	TA30S03-02Q1PTH
		2.1 X 33	TA30S03-H3Q1PTH
		2.1 X 50	TA30S03-05Q1PTH
		2.1 X 75	TA30S03-L5Q1PTH
		2.1 X 100	TA30S03-10Q1PTH
		2.1 X 150	TA30S03-15Q1PTH
		3.0 X 50	TA30S03-0503PTH
		3.0 X 75	TA30S03-L503PTH
		3.0 X 100	TA30S03-1003PTH
		3.0 X 150	TA30S03-1503PTH
		4.6 X 33	TA30S03-H346PTH
		4.6 X 50	TA30S03-0546PTH
		4.6 X 75	TA30S03-L546PTH
		4.6 X 100	TA30S03-1046PTH
		4.6 X 150	TA30S03-1546PTH
		4.6 X 250	TA30S03-2546PTH
5	300	2.1 X 20	TA30S05-02Q1PTH
		2.1 X 33	TA30S05-H3Q1PTH
		2.1 X 50	TA30S05-05Q1PTH
		2.1 X 75	TA30S05-L5Q1PTH
		2.1 X 100	TA30S05-10Q1PTH
		2.1 X 150	TA30S05-15Q1PTH
		3.0 X 50	TA30S05-0503PTH
		3.0 X 75	TA30S05-L503PTH
		3.0 X 100	TA30S05-1003PTH
		3.0 X 150	TA30S05-1503PTH
		4.0 X 150	TA30S05-1504PTH
		4.0 X 250	TA30S05-2504PTH
		4.6 X 33	TA30S05-H346PTH
		4.6 X 50	TA30S05-0546PTH
		4.6 X 75	TA30S05-L546PTH
		4.6 X 100	TA30S05-1046PTH
		4.6 X 150	TA30S05-1546PTH
		4.6 X 250	TA30S05-2546PTH

Semi-preparative Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	10 X 150	TA30S05-1510WT
5	300	10 X 250	TA30S05-2510WT

High Throughput Extended Life Semi-prep Columns (YMC-Actus Triart Bio C18)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	20 X 50	TA30S05-0520WX
		20 X 100	TA30S05-1020WX
		20 X 150	TA30S05-1520WX
		20 X 250	TA30S05-2520WX
		30 X 50	TA30S05-0530WX
		30 X 75	TA30S05-L530WX
		30 X 100	TA30S05-1030WX
		30 X 150	TA30S05-1530WX
		30 X 250	TA30S05-2530WX

EXP® Guard Cartridge Columns (Max. pressure: 100 MPa, 3/pack)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 5	TA30SP9-E5Q1CC
1.9	300	3.0 X 5	TA30SP9-E503CC

* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.

Guard Cartridge Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	/pack	Product Number
3	300	2.1 X 10	5	TA30S03-01Q1GC
		2.1 X 10	1	TA30S03-01Q1GC-1
		2.1 X 20	5	TA30S03-02Q1GC
		2.1 X 20	1	TA30S03-02Q1GC-1
		3.0 X 10	5	TA30S03-0103GC
		3.0 X 10	1	TA30S03-0103GC-1
		3.0 X 20	5	TA30S03-0203GC
		3.0 X 20	1	TA30S03-0203GC-1
		4.0 X 10	5	TA30S03-0104GC
		4.0 X 10	1	TA30S03-0104GC-1
		4.0 X 20	5	TA30S03-0204GC
		4.0 X 20	1	TA30S03-0204GC-1
5	300	2.1 X 10	5	TA30S05-01Q1GC
		2.1 X 10	1	TA30S05-01Q1GC-1
		2.1 X 20	5	TA30S05-02Q1GC
		2.1 X 20	1	TA30S05-02Q1GC-1
		3.0 X 10	5	TA30S05-0103GC
		3.0 X 10	1	TA30S05-0103GC-1
		3.0 X 20	5	TA30S05-0203GC
		3.0 X 20	1	TA30S05-0203GC-1
		4.0 X 10	5	TA30S05-0104GC
		4.0 X 10	1	TA30S05-0104GC-1
		4.0 X 20	5	TA30S05-0204GC
		4.0 X 20	1	TA30S05-0204GC-1
		10 X 10	2	TA30S05-0110CC
		20 X 10	2	TA30S05-0120CCN
		30 X 10	2	TA30S05-0130CCN

* When using it for the first time, please purchase the cartridge holder corresponding to size of column.

Cartridge holder

		Product Number
EXP^®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included)		XPCHUHP
Cartridge holder	length: 10 mm	XPGCHP1
Cartridge holder	length: 20 mm	XPGCHP2
Semi-prep Cartridge Holder	Inner diameter: 10 mm	XPCHSPW1
	Inner diameter: 20 mm	XPGHFSP20ID
	Inner diameter: 30 mm	XPGHFSP30ID

* EXP is a registered trademark of Optimize Technologies, Inc.

Analytical Columns (Max. pressure : 100 MPa for 1.9 µm, 45 MPa for 3 µm and 5 µm)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 20	TA30SP9-02Q1PT
		2.1 X 30	TA30SP9-03Q1PT
		2.1 X 50	TA30SP9-05Q1PT
		2.1 X 75	TA30SP9-L5Q1PT
		2.1 X 100	TA30SP9-10Q1PT
		2.1 X 150	TA30SP9-15Q1PT
		3.0 X 50	TA30SP9-0503PT
		3.0 X 75	TA30SP9-L503PT
		3.0 X 100	TA30SP9-1003PT
		3.0 X 150	TA30SP9-1503PT
3	300	2.1 X 20	TA30S03-02Q1PTH
		2.1 X 33	TA30S03-H3Q1PTH
		2.1 X 50	TA30S03-05Q1PTH
		2.1 X 75	TA30S03-L5Q1PTH
		2.1 X 100	TA30S03-10Q1PTH
		2.1 X 150	TA30S03-15Q1PTH
		3.0 X 50	TA30S03-0503PTH
		3.0 X 75	TA30S03-L503PTH
		3.0 X 100	TA30S03-1003PTH
		3.0 X 150	TA30S03-1503PTH
		4.6 X 33	TA30S03-H346PTH
		4.6 X 50	TA30S03-0546PTH
		4.6 X 75	TA30S03-L546PTH
		4.6 X 100	TA30S03-1046PTH
		4.6 X 150	TA30S03-1546PTH
		4.6 X 250	TA30S03-2546PTH
5	300	2.1 X 20	TA30S05-02Q1PTH
		2.1 X 33	TA30S05-H3Q1PTH
		2.1 X 50	TA30S05-05Q1PTH
		2.1 X 75	TA30S05-L5Q1PTH
		2.1 X 100	TA30S05-10Q1PTH
		2.1 X 150	TA30S05-15Q1PTH
		3.0 X 50	TA30S05-0503PTH
		3.0 X 75	TA30S05-L503PTH
		3.0 X 100	TA30S05-1003PTH
		3.0 X 150	TA30S05-1503PTH
		4.0 X 150	TA30S05-1504PTH
		4.0 X 250	TA30S05-2504PTH
		4.6 X 33	TA30S05-H346PTH
		4.6 X 50	TA30S05-0546PTH
		4.6 X 75	TA30S05-L546PTH
		4.6 X 100	TA30S05-1046PTH
		4.6 X 150	TA30S05-1546PTH
		4.6 X 250	TA30S05-2546PTH

Semi-preparative Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	10 X 150	TA30S05-1510WT
5	300	10 X 250	TA30S05-2510WT

High Throughput Extended Life Semi-prep Columns (YMC-Actus Triart Bio C18)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
5	300	20 X 50	TA30S05-0520WX
		20 X 100	TA30S05-1020WX
		20 X 150	TA30S05-1520WX
		20 X 250	TA30S05-2520WX
		30 X 50	TA30S05-0530WX
		30 X 75	TA30S05-L530WX
		30 X 100	TA30S05-1030WX
		30 X 150	TA30S05-1530WX
		30 X 250	TA30S05-2530WX

EXP® Guard Cartridge Columns (Max. pressure: 100 MPa, 3/pack)

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	Product Number
1.9	300	2.1 X 5	TA30SP9-E5Q1CC
1.9	300	3.0 X 5	TA30SP9-E503CC

* When using it for the first time, please purchase the EXP® Guard Cartridge Holder.
* EXP is a registered trademark of Optimize Technologies, Inc.

Guard Cartridge Columns

Particle size (µm)	Pore size (Å)	Column size Inner diameter X length (mm)	/pack	Product Number
3	300	2.1 X 10	5	TA30S03-01Q1GC
		2.1 X 10	1	TA30S03-01Q1GC-1
		2.1 X 20	5	TA30S03-02Q1GC
		2.1 X 20	1	TA30S03-02Q1GC-1
		3.0 X 10	5	TA30S03-0103GC
		3.0 X 10	1	TA30S03-0103GC-1
		3.0 X 20	5	TA30S03-0203GC
		3.0 X 20	1	TA30S03-0203GC-1
		4.0 X 10	5	TA30S03-0104GC
		4.0 X 10	1	TA30S03-0104GC-1
		4.0 X 20	5	TA30S03-0204GC
		4.0 X 20	1	TA30S03-0204GC-1
5	300	2.1 X 10	5	TA30S05-01Q1GC
		2.1 X 10	1	TA30S05-01Q1GC-1
		2.1 X 20	5	TA30S05-02Q1GC
		2.1 X 20	1	TA30S05-02Q1GC-1
		3.0 X 10	5	TA30S05-0103GC
		3.0 X 10	1	TA30S05-0103GC-1
		3.0 X 20	5	TA30S05-0203GC
		3.0 X 20	1	TA30S05-0203GC-1
		4.0 X 10	5	TA30S05-0104GC
		4.0 X 10	1	TA30S05-0104GC-1
		4.0 X 20	5	TA30S05-0204GC
		4.0 X 20	1	TA30S05-0204GC-1
		10 X 10	2	TA30S05-0110CC
		20 X 10	2	TA30S05-0120CCN
		30 X 10	2	TA30S05-0130CCN

* When using it for the first time, please purchase the cartridge holder corresponding to size of column.

Cartridge holder

		Product Number
EXP^®direct connect holder (Adjustable ferrule, Pressure limit: 137 MPa) (2 titanium hybrid ferrules and 1 nut included)		XPCHUHP
Cartridge holder	length: 10 mm	XPGCHP1
Cartridge holder	length: 20 mm	XPGCHP2
Semi-prep Cartridge Holder	Inner diameter: 10 mm	XPCHSPW1
	Inner diameter: 20 mm	XPGHFSP20ID
	Inner diameter: 30 mm	XPGHFSP30ID

YMC-Triart

YMC-Triart Bio C18

YMC-Triart Bio C18

YMC-Triart Bio C18

Specification:

Specification:

Specification:

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

Good peak shape with mobile phase suitable for LC/MS

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

Good peak shape with mobile phase suitable for LC/MS

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

Good peak shape with mobile phase suitable for LC/MS

Specification:

Specification:

Specification:

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

Good peak shape with mobile phase suitable for LC/MS

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

Good peak shape with mobile phase suitable for LC/MS

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

Good peak shape with mobile phase suitable for LC/MS

Specification:

Specification:

Specification:

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

Good peak shape with mobile phase suitable for LC/MS

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

Good peak shape with mobile phase suitable for LC/MS

Suitable for separation of peptides and proteins with molecular weight over 10 kDa

Good peak shape with mobile phase suitable for LC/MS

Related Product

YMC-Pack Pro C18

YMC-Pack Pro C18

YMC-Pack Pro C18

CHIRAL ART Coated type

CHIRAL ART Coated type

CHIRAL ART Coated type

CHIRAL ART Immobilized type

CHIRAL ART Immobilized type

CHIRAL ART Immobilized type

Triart Prep SIL

Triart Prep SIL

Triart Prep SIL

Triart Prep Bio200 C8

Triart Prep Bio200 C8

Triart Prep Bio200 C8

Triart Prep C8-S

Triart Prep C8-S

Triart Prep C8-S

Company Info

Product Category

YMC Singapore Tradelinks Pte. Ltd.

Newsletter

© 2022 YMC. All rights reserved.

Designed by Wondertabs

Company Info

Product Category

YMC Singapore Tradelinks Pte. Ltd.

Newsletter

© 2022 YMC. All rights reserved.

Designed by Wondertabs

Company Info

Product Category

YMC Singapore Tradelinks Pte. Ltd.

Newsletter

© 2022 YMC. All rights reserved.

Designed by Wondertabs

Newsletter

Company Info

Product Category

Support

YMC Singapore Tradelinks Pte. Ltd.

Newsletter

Company Info

Search Product here

YMC Singapore Tradelinks Pte. Ltd.

Subscribe to Our Newsletter